|Project by TrBlu||posted 05-26-2012 04:06 PM||3003 views||14 times favorited||8 comments|
I have a bunch of solid surface countertop from a demolition project at a trade show. This stuff comes in handy for making all sorts of jigs. Just be sure to chamfer the edges, so they don’t cut your work surfaces.
This edge guide allows me to route a dado, or similar pattern design as far as 12” from edge to center of the bit. Counter top for the base and the runner guide, a couple of 1/4” bolts with star knobs, and a 1 1/4” dowel for a grip. Even used another jig (circle jig) to route the arched slot at the pivot.
Pic #1 – Guide with Router
Pic #2 – Top of Guide
Pci #3 – Bottom of Guide
My humble, yet functional entry in the Stumpy Nubs Jig Contest.
Thanks for looking. Comments & Critiques welcome.
-- The more I work with wood the more I recognize only God can make something as beautiful as a tree. I hope my humble attempts at this craft do justice by His masterpiece. -- Tim