Laptop table

  • Advertise with us
Project by mailee posted 05-23-2012 10:56 PM 1382 views 1 time favorited 2 comments Add to Favorites Watch

I have just finished this Oak table for a laptop computer. It is made from European Oak with a 2K lacquer finish. The apron was attached with mitred tenons in mortises at the top and the shelf rails use straight tenons. The breadboard top was made using rubbed joints on the centre boards. A loose tenon is used for the ends and this consists of gluing the centre while using screws in slotted holes for the ends to allow for movement. It was made to match some existing furniture and allow the laptop to be used while seated on a couch. Thanks for looking.


2 comments so far

View atchison32's profile


153 posts in 2781 days

#1 posted 05-24-2012 02:45 PM

Very well done!

View helluvawreck's profile


29652 posts in 2735 days

#2 posted 05-24-2012 03:07 PM

It looks really nice; Congratulations.


-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics