LumberJocks

Juniper outdoor cover

  • Advertise with us
Project by junipercanyon posted 05-23-2012 02:50 PM 2175 views 2 times favorited 9 comments Add to Favorites Watch

Almost done with my outdoor hangout. I need to put a fascia around the perimeter of the roof edge, finish building table tops over the top of the stumps that are the base for the vertical beams, and build a much nicer picnic table to go with it. I’ll eventually add a flat roof off the front to extend to the edge of the concrete, probably put in a juniper mantle and maybe a bar top somewhere.

I milled all the lumber from juniper with my Alaskan chainsaw attachment. The beams are 6×6, and the boards are 2x(Tapered) with live edge on the bottom. It took a pretty big tree to make the 14’ beam across the front. Its been a fun project, (a lot of work, but fun). All the trees I milled were going to be firewood, so it was pretty cool to give them a longer lasting purpose.

-- Juniper Canyon Design





9 comments so far

View Monte Pittman's profile

Monte Pittman

14176 posts in 992 days


#1 posted 05-23-2012 02:54 PM

Great use for the wood. Nice hangout. I use the Alaskan mill also.keep up the good work.

-- Mother Nature created it, I just assemble it.

View workerinwood's profile

workerinwood

2708 posts in 1721 days


#2 posted 05-23-2012 03:17 PM

Well done !! When is the party?

-- Jack, Albuquerque

View Nate Meadows's profile

Nate Meadows

1077 posts in 860 days


#3 posted 05-23-2012 03:25 PM

Ok, I have to admit I am a little jealous here:). Very cool!!!! What an accomplishment. I love taking something from tree to timber, to project! You sir should be proud!

Very Respectfully,

Nate

-- "With a little bit of faith, and some imagination, you can build anything!" Nate

View Ken90712's profile

Ken90712

14938 posts in 1842 days


#4 posted 05-23-2012 04:48 PM

Very nicely done should serve you well.

-- Ken, "Everyday above ground is a good day!"

View Kevin May's profile

Kevin May

65 posts in 969 days


#5 posted 05-23-2012 09:27 PM

Nice hang-out.

-- Kevin May "Making wood useful and fun!" www.kevinmaywoodworks.com

View jaykaypur's profile

jaykaypur

3344 posts in 1062 days


#6 posted 05-23-2012 10:32 PM

Really like this! Like how you incorporated the fireplace as one of the “corners.” This will be a great hangout/picnic/BBQ spot! Great job.

Man…................. I wish I had one of those mills!

-- Use it up, Wear it out --------------- Make it do, Or do without!

View Martyroc's profile

Martyroc

2708 posts in 960 days


#7 posted 05-23-2012 11:43 PM

Great hangout! Nicely done.

-- Martin ....always count the number of fingers you have before, and after using the saw.

View junipercanyon's profile

junipercanyon

192 posts in 1347 days


#8 posted 05-24-2012 02:13 PM

Thank you everybody….Its been pretty enjoyable…..rain or shine we have spent many evenings the past couple of months hanging out by the fire.

-- Juniper Canyon Design

View Allanwoodworks's profile

Allanwoodworks

112 posts in 1495 days


#9 posted 05-24-2012 05:25 PM

Very Nice!

-- Ty, Up in Washington

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase