Folding Adirondack Table

  • Advertise with us
Project by Dennis Hunter / Laura Merchant posted 05-21-2012 08:58 PM 3965 views 0 times favorited 10 comments Add to Favorites Watch

I made this Table yesterday after a plastic folding table I had seen. The table is made of white cedar and is water proofed and stained in Honey Brown. The table is 21” oblong. stands 17” high. One more piece to add to my chairs.
Thanks Dennis

-- (L an D Woodworks)

10 comments so far

View amagineer's profile


1415 posts in 2832 days

#1 posted 05-21-2012 09:25 PM

What a nice folding table. You are very busy with building outdoor furniture. I will keep this design in mind for a future project.

-- Flaws are only in the eye of the artisan!

View bowtie's profile


990 posts in 2581 days

#2 posted 05-21-2012 10:19 PM

Very nice table and design. I like the dowel “handle” which is exposed when folded.

-- bowtie,.....jus passin thru....

View robert triplett's profile

robert triplett

1566 posts in 3340 days

#3 posted 05-21-2012 11:15 PM

Great design. It folds well. I bet the next one is even better. Should make a great set with two chairs

-- Robert, so much inspiration here, and now time to work!!!

View jaykaypur's profile


4017 posts in 2643 days

#4 posted 05-21-2012 11:36 PM

Nice work. You missed your calling as an outdoor furniture maker but are certainly making up for lost time. Great job.

-- Use it up, Wear it out --------------- Make it do, Or do without!

View Monte Pittman's profile

Monte Pittman

30128 posts in 2573 days

#5 posted 05-21-2012 11:42 PM

Simple & nice looking. Simple is always good in summer.

-- Nature created it, I just assemble it.

View sandhill's profile


2128 posts in 4159 days

#6 posted 05-22-2012 12:43 AM

Nice design, very useful Are you going to plug the screws so they don’t show?

View Martyroc's profile


2712 posts in 2541 days

#7 posted 05-22-2012 01:32 AM

Looks good Dennis, i like the folding design of this, well done.

-- Martin ....always count the number of fingers you have before, and after using the saw.

#8 posted 05-22-2012 01:52 AM

No Sandhill to late for that but the next one I am using doles no screws on top. This was my first on and I need to make a few little changes to it but this one took all darn day to build LOL.

-- (L an D Woodworks)

View Jeffery Mullen's profile

Jeffery Mullen

355 posts in 3053 days

#9 posted 05-22-2012 07:10 AM

Very well done. I made one as well and they can be a challenge to put together. you may go to my home page to see mine that I made out of scrap wood and kitchen cub bards that came out of a house for the table top. I use both of them I made for my wood shop to put stuff on. I wish you the best with your furniture.

-- Jeffery Mullen

View wiser1934's profile


525 posts in 3382 days

#10 posted 05-25-2012 01:40 AM

very very nice!

-- wiser1934, new york

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics