Shopmade Jig Star Knobs

  • Advertise with us
Project by Bricofleur posted 05-19-2012 03:23 PM 27507 views 126 times favorited 27 comments Add to Favorites Watch

Always in need for jig knobs, I found this clever way to make my own using scraps, carriage bolts, T-nuts and two sizes of hole saw.

With these 2’’ in diameter, don’t you think my jigs will look store bought?

Find all construction details and photos on this page of my blog.



-- Learn from yesterday, work today and enjoy success tomorrow. --

27 comments so far

View ineedathis's profile


75 posts in 2591 days

#1 posted 05-19-2012 03:47 PM

Great idea! thanks for the tip.

View a1Jim's profile


117029 posts in 3508 days

#2 posted 05-19-2012 03:52 PM

Thanks Serge

-- wood crafting & classes

View Time2beupinAZ's profile


453 posts in 2893 days

#3 posted 05-19-2012 03:56 PM

nice job there.

-- Tim - I usally measure twice after I cut......then I know for sure that I cut it short.....

View eddie's profile


8565 posts in 2545 days

#4 posted 05-19-2012 04:33 PM

Thanks Serge as always you come up with an idea that works, thank you for sharing as i am in need of these now ..i signed up at your web site and looks like you will be needing to get a book out before to long my favorites is getting full :)

-- Jesus Is Alright with me

View mafe's profile


11638 posts in 3021 days

#5 posted 05-19-2012 05:31 PM

Clever Serge!
They look really cool, thx for showing how you did.
Best thoughts my friend,

-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

View majuvla's profile


11876 posts in 2799 days

#6 posted 05-19-2012 06:14 PM


-- Ivan, Croatia, Wooddicted

View Ken90712's profile


17553 posts in 3120 days

#7 posted 05-19-2012 06:15 PM

Great work Serge, As always your ideas are great thx for sharing.

-- Ken, "Everyday above ground is a good day!"

View GMman's profile


3902 posts in 3629 days

#8 posted 05-19-2012 06:20 PM

I have never seen someone with so many great ideas.
Thanks buddy you are an inventor and a good one.

View fernandoindia's profile


1081 posts in 2875 days

#9 posted 05-19-2012 08:05 PM

Cool. Thank you Serge. Always good ideas

-- Back home. Fernando

View felkadelic's profile


218 posts in 2471 days

#10 posted 05-20-2012 12:34 AM

I like it! Any tips for efficiently but safely routing the roundover on such a small piece?

View MShort's profile


1789 posts in 3350 days

#11 posted 05-20-2012 12:52 AM

Another great one Serge. Thanks.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View 559dustdesigns's profile


633 posts in 3099 days

#12 posted 05-20-2012 01:44 AM

Your knobs are great, thanks for sharing your ideas. Keep up the great woodwork.

-- Aaron - central California "If you haven't got the time to do it right, when will you find the time to do it over?"

View redryder's profile


2393 posts in 3033 days

#13 posted 05-20-2012 04:27 AM

The stores will hate you. Nice build….................

-- mike...............

View kiefer's profile


5618 posts in 2598 days

#14 posted 05-20-2012 04:27 AM

Nice knobs Serge .
Well thought out and made .


-- Kiefer

View Dusty56's profile


11819 posts in 3619 days

#15 posted 05-20-2012 04:50 AM

Very nice looking knobs , Serge…who needs black plastic when you could paint your own MDF or plywood : )

-- I'm absolutely positive that I couldn't be more uncertain!

showing 1 through 15 of 27 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics