| Project by SirFatty | posted 376 days ago | 655 views | 1 time favorited | 2 comments |  |
 |
A few years ago my wife was running a daycare out of our house. She needed a good table for them to play on, build on and draw on. Also, one that would allow the kids to play with the wood train set and not have to clean that up each day.
The table design is not unique, they can be purchased easily. But this one was made from a single sheet of 1/2 birch plywood, 1/2” MDF (for the top and bottom) and a couple quarts of paint. It was a day project and the kids really liked using it.
You can see some felt pads around the sides, it made lifting the top off a little easier because the top sealed itself to the base.
| Pin It |
2 comments so far
Martyroc
home | projects | blog
2708 posts in 473 days
#1 posted 376 days ago
Looks good and does the job, nicely done
-- Martin ....always count the number of fingers you have before, and after using the saw.
missingdigitworkshop
home | projects | blog
135 posts in 1295 days
#2 posted 375 days ago
Nice looking table. You should be able to get a lot of use out of it.
Later you can add a hinge to the top and repurpose it as the kids grow.
-- Do not be discouraged by those who don't. Be inspired by those who do.
Have your say...