Walnut serviette box

  • Advertise with us
Project by chadgr posted 05-06-2012 06:08 PM 1612 views 0 times favorited 1 comment Add to Favorites Watch

I made this project out of scrap pieces of walnut from another project, it is very simple and only uses mitered corners and glue. I made this in a few hours, as for finish I sanded the entire box up to 350 grit sandpaper and then put a coat of sanding sealer on it, after the sanding sealer had dried I then put brushing lacquer on it, again after the first coat had dried i gave it a very light 2000 grit sanding by hand, then put on the last coat of lacquer on it.

By Chad
Aged: 14

-- Chad Griffiths Vist my Etsy Shop

1 comment so far

View doncutlip's profile


2832 posts in 3754 days

#1 posted 05-06-2012 10:33 PM

Nice corners, good looking project

-- Don, Royersford, PA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics