| Project by dnick | posted 387 days ago | 799 views | 3 times favorited | 7 comments |  |
 |
A Maple & Mahogony frame. Tung oil finish. The Maple isn’t really that interesting, but this was an experiment. I really like the shallow cove on the outer molding. I used a 1/2” cove bit with all but 3/16” buried in the fence. Raised the bit as needed for each pass. 3/16’ radius on the edge. I’m sure that cove has been used a million times, but it was new to me & I’m sure gonna use it again.
-- dnick, North Hollywood, Ca.
| Pin It |
7 comments so far
lightweightladylefty
home | projects | blog
2072 posts in 1885 days
#1 posted 387 days ago
Very nice looking frame! The profile and color combination is excellent. Thanks for sharing.
L/W
-- Jesus is the ONLY reason for ANY season.
Ken90712
home | projects | blog
12676 posts in 1361 days
#2 posted 386 days ago
Great job, looks really nice.
-- Ken, "Everyday above ground is a good day!"
Martyroc
home | projects | blog
2708 posts in 478 days
#3 posted 386 days ago
Great looking frame.
-- Martin ....always count the number of fingers you have before, and after using the saw.
woodrookieII
home | projects | blog
194 posts in 836 days
#4 posted 386 days ago
That’s an amazing frame!!
Beautiful!!
...rookieII
Woodwrecker
home | projects | blog
3010 posts in 1748 days
#5 posted 386 days ago
Great job on that frame.
The technique you used for the cove really gives it that extra touch.
Beautiful job.
And I love the smile on that little guy.
He looks ready to go !
-- Eric
workerinwood
home | projects | blog
2494 posts in 1240 days
#6 posted 386 days ago
Well done!! Like the wood contrasts.
-- Jack, Albuquerque
sedcokid
home | projects | blog
2508 posts in 1771 days
#7 posted 295 days ago
Beatiful Frame! I really like it!!! Great Job!
-- Chuck Emery, Michigan,
Have your say...