| Project by wlojr | posted 413 days ago | 796 views | 2 times favorited | 4 comments |  |
 |
Made this cart to hold about 200 dowels that I won in an auction, used 2×4’s for the frame, planed pallet wood for bottom and 2 sides, used pegboard for two of the sides, 1×2’s for the dividers, made the handle from pieces of 1×4 scrap and a dowel.
| Pin It |
4 comments so far
thelt
home | projects | blog
569 posts in 1577 days
#1 posted 413 days ago
Good job on the cart. Better job on finding the dowels.
-- When asked what I did to make life worthwhile in my lifetime....I can respond with a great deal of pride and satisfaction, "I served a career in the United States Navy."
Martyroc
home | projects | blog
2708 posts in 503 days
#2 posted 413 days ago
Nice cart, and a great auction win, that would probably last me 10 years, :)
-- Martin ....always count the number of fingers you have before, and after using the saw.
workerinwood
home | projects | blog
2540 posts in 1265 days
#3 posted 413 days ago
Nice job!! What are you going to do with all of those dowels?
-- Jack, Albuquerque
wlojr
home | projects | blog
68 posts in 413 days
#4 posted 412 days ago
I have used a few here and there, but I have some closet’s to build in my unfinished basement I will use a few on. :)
Have your say...