This is an end grain, butcher block cutting board, measuring approximately 14” x 16” x 2” thick. The board is made from Rock Maple and Walnut, alternating in a pattern that resulted from left over scraps :) This particular board includes a juice moat on the top, and a decorative cutout on the bottom for hand holds (Similar to other boards on this page). I always coat my cutting boards with several coats of mineral oil, with routine re-coats as needed. I hope that you enjoy the pics and thank you for visiting.
4 comments so far
Martyroc
home | projects | blog
2708 posts in 471 days
#1 posted 381 days ago
Good Looking board, I prefer the non checkerboard pattern every now and then, sets these boards apart.
-- Martin ....always count the number of fingers you have before, and after using the saw.
dub560
home | projects | blog
602 posts in 1078 days
#2 posted 381 days ago
sweet looking boards
-- Life is enjoyable especially when you borrow from people
amagineer
home | projects | blog
1013 posts in 762 days
#3 posted 381 days ago
Nice design. It should last a long time.
-- Flaws are only in the eye of the artisan!
Ken90712
home | projects | blog
12660 posts in 1354 days
#4 posted 381 days ago
Well done the Woodwhisper would be proud.
-- Ken, "Everyday above ground is a good day!"
Have your say...