|Project by KCoombs||posted 04-23-2012 09:43 PM||14413 views||30 times favorited||12 comments|
Because I ended up with two Kreg K3’s, I wanted to make a simple, but useful, station for them. This allows me to work more easily with wider material. It also allows me to more quickly work with thinner material, as one jig is set up with the micro drill guide.
Drill bit storage is right up front and very easily accessed. Driver bits are stored right on the top of the base. There is a stop for each jig (though I don’t use them often).
The station quickly clamps in place on my assembly table and I have room under my main bench for storage when this is not in use.