| Project by matt12874 | posted 401 days ago | 1806 views | 10 times favorited | 6 comments |  |
 |
We needed something nice looking to hold our coffee selection for our Keurig machine. Here it is made of Poplar with a clear poly finish. used a 12” x 12” ceramic tile on top for looks and protection from water spillage. I was very surprised the colour some how is very close to the cabinet colour.
much better then the particle board ones the sell for $45
Have been asked to make a black one for a friend next.
-- Matt
| Pin It |
6 comments so far
SteveMI
home | projects | blog
806 posts in 1462 days
#1 posted 400 days ago
We have one of the plastic carousel K-cup holders, but it takes up more space on the counter-top. This would gain room, I have to think about making one.
Steve.
doncutlip
home | projects | blog
2808 posts in 1724 days
#2 posted 400 days ago
Very well done, a nice custom piece.
-- Don, Royersford, PA
Jim
home | projects | blog
99 posts in 537 days
#3 posted 400 days ago
Nice job, the wife bought a metal one. But I’m thinking:)
-- Measure twice, cut once.
fuckoff
home | projects | blog
157 posts in 462 days
#4 posted 400 days ago
good idea,I like the tile.This would be a good project for gifts and like you said better than particle board.
eddie
home | projects | blog
4581 posts in 782 days
#5 posted 400 days ago
i like it, that got to favor it. it great job.like the tile too.
-- Jesus Is Alright with me
Jason
home | projects | blog
628 posts in 1676 days
#6 posted 395 days ago
That is way better than the idea I had. I even have some spare pieces of tile. Not sure I have enough height between the countertop and the cabinets. Thanks for sharing. Great project.
-- Jason - Colorado Springs
Have your say...