| Project by Dennis Hunter / Laura Merchant | posted 404 days ago | 1325 views | 10 times favorited | 4 comments |  |
 |
I was asked if I would post my stands I make to hold the cutting board so here is one of them. It stands 8” high and is 3” wide by 3/4” the angle can be cut at what ever angle you want I guess I cut mine so the board stand up more staight. I routed a round over edge on both sides of the stand simple but it works and I sold a set last week with a Cutting Board.
Thanks Dennis
-- http://www.landwoodworks.com (L an D Woodworks)
| Pin It |
4 comments so far
Andrew
home | projects | blog
233 posts in 538 days
#1 posted 404 days ago
This is great. Do you happen to have a template you use for these that you could share? :)
-- Andrew - Albany. NY
amagineer
home | projects | blog
1023 posts in 768 days
#2 posted 404 days ago
Dennis: Nice idea, I will have to see if the CB customers I have would be interested in me making a CB stand. One of the statements I hear is, “its to nice to use” and maybe they will want a stand. I usually have leftover CB pieces left that would make nice stands. Thanks for sharing.
-Don
-- Flaws are only in the eye of the artisan!
harrywho
home | projects | blog
95 posts in 1403 days
#3 posted 403 days ago
Thanks Dennis
-- Harry, Indiana
degoose
home | projects | blog
6596 posts in 1525 days
#4 posted 254 days ago
Fabulous idea, another thing I have been pondering… thanks… keep up the inspirational posts…
-- Drink twice... and don't bother to cut... @ larrysworkshop.wordpress.com For lovers of all things timber...
Have your say...