| Project by Seenya | posted 407 days ago | 815 views | 0 times favorited | 3 comments |  |
 |
Decided Friday to make some presents for our family Easter gathering. I got the design online somewhere. Can’t remember exactly where. I made a template so I could make more for Christmas. The plan called for a 35 degree angle on the bottom and it worked well. Since I don’t have a table saw I used the band saw which was a little tedious but made the cut pretty smooth. I used flame birch, zebrawood and bloodwood. I finished them with Bulls Eye shellac.
-- Semper Fi
| Pin It |
3 comments so far
wrtnaz
home | projects | blog
39 posts in 1111 days
#1 posted 406 days ago
great work! I have made a couple of these but not near as nice as these. What was the dimension and angle of the hole for the bottle neck?
-- wrtnaz
Tulsapiano
home | projects | blog
8 posts in 407 days
#2 posted 406 days ago
How much movement does it take to tip it backward or forward. If there is a little vibration it holds pretty well?
Seenya
home | projects | blog
33 posts in 610 days
#3 posted 406 days ago
Thanks, wrtnaz. It’s a 1 1/4” hole drilled straight through, no angle. Vibration isn’t a problem. If it was on a table and somebody bumped the table fairly hard, it would probably fall. They’re pretty stable, though.
-- Semper Fi
Have your say...