|Project by Ehren||posted 04-09-2012 02:44 PM||1619 views||2 times favorited||3 comments|
I finally completed my son’s crib just in time for him to move out of his sleep and into this.
It was completed using 4/4 Rough sawn local red oak from a mill just down the road (1hr) from us. I finished the poject in tung oil and then a 3 coats of clear semi gloss.
The bed height is adjustable and the whole bit will collapse into 4 pannels and the 4 feet. The rails and moulding are bent to match the profile.
I loaded my allowable 6 pictures, one with a lot of snazy clamps, but if you’re curious the whole build can be found here: http://lumberjocks.com/ehrenal/blog/series/5062