Drunken Bread Board

  • Advertise with us
Project by Shanem posted 04-05-2012 02:21 PM 2569 views 12 times favorited 12 comments Add to Favorites Watch
Drunken Bread Board
Drunken Bread Board No picture No picture No picture No picture No picture
Zoom Pictures

Well it’s been on my list for a while to try one of these out. The boards are 9”X25” rock maple and mahogany.
Picture shows them after first coat of oil. They are for a wedding gift next week.
I was able to try my new Delta drum sander out. I’ve heard mixed reviews but decided to take the chance. I took light passes and never had a problem.

Thanks for looking

12 comments so far

View helluvawreck's profile


22687 posts in 2288 days

#1 posted 04-05-2012 02:43 PM

I like it and it looks really good. I assume that it’s fairly difficult to make one of these. I’ve never gotten into the ‘cutting board’ thing so I haven’t paid much attention to the techniques. These look good though. Nice work.


-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View deon's profile


2507 posts in 2448 days

#2 posted 04-05-2012 04:18 PM


-- Dreaming patterns

View pmelchman's profile


85 posts in 2576 days

#3 posted 04-05-2012 07:18 PM

what is the trick?

-- Patrick

View JoeinDE's profile


416 posts in 2745 days

#4 posted 04-05-2012 07:22 PM

pmelchman – Patron has a good tutorial/blog on the “trick”

-- A bad craftsmen blames his cheap #$%ing tools

View gavinzagreb's profile


210 posts in 1741 days

#5 posted 04-05-2012 07:37 PM

I’m a little drunk at the moment, so they just look like normal boards to me. : )
Well done !

View degoose's profile


7193 posts in 2777 days

#6 posted 04-05-2012 08:55 PM

Great results with the wild design. You can also check Scott Porosky's blog

-- Drink twice... and don't bother to cut... @ For lovers of all things timber...

View doncutlip's profile


2832 posts in 2978 days

#7 posted 04-05-2012 11:10 PM

Wow that must have been a challenge, excellent work

-- Don, Royersford, PA

View amagineer's profile


1414 posts in 2019 days

#8 posted 04-06-2012 12:30 AM

You are spot on with the design. It looks wonderful.

-- Flaws are only in the eye of the artisan!

View robdem's profile


377 posts in 2028 days

#9 posted 04-06-2012 01:22 AM

Nice boards great design

View NoKetchup's profile


8 posts in 1665 days

#10 posted 04-06-2012 01:30 AM

ummm, wow!

View Oldwest's profile


83 posts in 2226 days

#11 posted 04-06-2012 07:37 AM

Great looking boards, you have a good drunken wave on them.

The Delta sander should be great I have a Performax (Jet)
sander and use it all the time. It really helps when your
making the drunken boards.

-- Anyone who isn’t totally confused just doesn’t understand the situation.

View Shanem's profile


128 posts in 1888 days

#12 posted 04-06-2012 12:51 PM

Thanks for all the kind comments.
I read read Scott’s blog (link above) and knew I had to try one.

really enjoyed the Delta. Interested in using it on an end grain board

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics