| Project by jeff robinson | posted 409 days ago | 1183 views | 2 times favorited | 3 comments |  |
 |
this my outfeed table it was a old drafting table i just put new top on added supports attached to saw with angle iron to bottom of fence rail no new pic with miter slots
-- jeff robinson, panama city, fl
| Pin It |
3 comments so far
cutworm
home | projects | blog
684 posts in 959 days
#1 posted 409 days ago
Nice. Great idea too. We have 7 tables at work similar to yours and they motorized, Up down buttons, memory and they are trashing them. You don’t even ask to take one home. A million uses in the shop.
-- "Actions speak louder than words but not nearly as often." - Mark Twain
cgrooms
home | projects | blog
31 posts in 1256 days
#2 posted 409 days ago
I like that table. I have the same saw and i’ve been wanting/needing to build an outfeed table for it. I may use some ideas from your table in mine.
linuxguy
home | projects | blog
12 posts in 542 days
#3 posted 408 days ago
Thanks, Jeff the pictures give great ideas for table support and attachment. Were there miter slots in the pictures included in your sled project?
Have your say...