Monitor Stand (for computer)

  • Advertise with us
Project by MoshupTrail posted 04-02-2012 12:30 AM 2296 views 1 time favorited 5 comments Add to Favorites Watch

Decided to make this for friend on Friday. Found some leftover bits of 1” thick poplar and a small square of plywood with 2 good sides. Knocked out the frame on Saturday, finished it on Sunday. Basically it’s made from scraps. I used simple pocket hole joinery for speed. One coat of non-wax shellac, a light, fine sanding, and a coat of spray lacquer.

-- Some problems are best solved with an optimistic approach. Optimism shines a light on alternatives that are otherwise not visible.

5 comments so far

View FirehouseWoodworking's profile


629 posts in 1969 days

#1 posted 04-02-2012 12:43 AM

Nicely done. Simple and elegant! Well done.


-- Dave; Lansing, Kansas

View Joe Lyddon's profile

Joe Lyddon

7813 posts in 2748 days

#2 posted 04-02-2012 01:26 AM

Very COOL and useful!

Great job!

Thank you.

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:"

View Martyroc's profile


2708 posts in 1002 days

#3 posted 04-02-2012 01:48 AM

That’s a cool design, came out really nice.

-- Martin ....always count the number of fingers you have before, and after using the saw.

View Woodbridge's profile


2779 posts in 1114 days

#4 posted 04-02-2012 02:34 AM

Nice design, I like the gloss black finish.

-- Peter, Woodbridge, Ontario

View Eric in central Florida's profile

Eric in central Florida

3637 posts in 2272 days

#5 posted 04-02-2012 03:16 AM

Simple & effective takes the cake every time.
Nice job.

-- All glory comes from daring to begin.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase