LumberJocks

Cutting board

  • Advertise with us
Project by amagineer posted 04-01-2012 06:15 PM 1993 views 3 times favorited 7 comments Add to Favorites Watch

This CB is made from purpleheart, yellowheart, macawood, white limba, and hard maple. It measures 12×18 x 1-1/2 thk and sealed with salad bowl finish and finished with mineral oil/beeswax. The hard maple is from a find in a barn in New Hampshire. It was a pullout breadboard in a kitchen cabinet that I was told was made by the farmer who lived there about 70 years ago. After planing and cutting, the wood was giving up the wonderful tight grain from woods of the past, so I decided to incorperate it into this board. My plan is to build up my inventory again. I will be driving up to Greenfield lumber mill next week to replenish my wood stock with some stunning colors and grains. Thanks for looking.
-Don

-- Flaws are only in the eye of the artisan!





7 comments so far

View SPalm's profile

SPalm

5325 posts in 4060 days


#1 posted 04-01-2012 07:19 PM

Hey Don, you’re back in the saddle now.

Nice board. I like the double reversed strip – adds interest.

Steve

-- -- I'm no rocket surgeon

View degoose's profile

degoose

7243 posts in 3533 days


#2 posted 04-01-2012 08:03 PM

Vibrant… and the use of two blanks is cool..

-- Don't drink and use power tools @ lasercreationsbylarry.com.au

View patron's profile

patron

13635 posts in 3519 days


#3 posted 04-01-2012 11:43 PM

very nice work

magical

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View a1Jim's profile

a1Jim

117283 posts in 3755 days


#4 posted 04-01-2012 11:46 PM

Great looking board I really like the woods you used.

-- https://www.artisticwoodstudio.com/videos wood crafting & woodworking classes

View Martyroc's profile

Martyroc

2712 posts in 2484 days


#5 posted 04-02-2012 02:06 AM

Great looking board, your choice of wood is outstanding.

-- Martin ....always count the number of fingers you have before, and after using the saw.

View Ken90712's profile

Ken90712

17592 posts in 3367 days


#6 posted 04-02-2012 02:20 PM

Very nice and great colors.

-- Ken, "Everyday above ground is a good day!"

View BlankMan's profile

BlankMan

1490 posts in 3531 days


#7 posted 04-02-2012 03:06 PM

Very nice design. I like the color change from the outside to the middle then back again.

-- -Curt, Milwaukee, WI

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com