LumberJocks

Dremel Router Table

  • Advertise with us
Project by RustyL posted 03-24-2012 01:32 AM 32034 views 33 times favorited 18 comments Add to Favorites Watch

I built this mini router table with micro height adjustment.
The table and the slide are from cutting boards.

RustyL

-- Don't apprentice under anyone with less than ten fingers.





18 comments so far

View jacob34's profile

jacob34

465 posts in 1958 days


#1 posted 03-24-2012 02:49 AM

man I like that, don’t know that I would personally ever use it but I like it.

-- so a bear and a rabbit are sitting on a log

View Eagle1's profile

Eagle1

2066 posts in 2759 days


#2 posted 03-24-2012 08:50 AM

Nice. I think it would pretty good for a lot of detail work.
Great idea..

-- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened

View 489tad's profile

489tad

3193 posts in 2706 days


#3 posted 03-24-2012 10:54 AM

I bought the plung base for mine years back and use it to smooth to the line for patterns. I think your table is a better idea. You’ve done a fantastice job of engineering that.

-- Dan, Naperville IL, I.G.N.

View helluvawreck's profile

helluvawreck

26827 posts in 2561 days


#4 posted 03-24-2012 11:13 AM

Good for delicate work. Nice going.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Viking's profile

Viking

878 posts in 2890 days


#5 posted 03-24-2012 11:13 AM

Neat idea and well designed. Thanks for sharing.

-- Rick Gustafson - Lost Creek Ranch - Colorado County, Texas

View BritBoxmaker's profile

BritBoxmaker

4609 posts in 2731 days


#6 posted 03-24-2012 12:36 PM

An interesting idea. Well engineered.

-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging. http://www.theartofboxes.com

View doncutlip's profile

doncutlip

2832 posts in 3250 days


#7 posted 03-24-2012 03:44 PM

Cool idea and well executed

-- Don, Royersford, PA

View Philip's profile

Philip

1277 posts in 2233 days


#8 posted 03-24-2012 08:42 PM

The first tool I ever bought was a dremmel- to etch glass with, ha! This is a great idea.

-- I never finish anyth

View dustysawyer's profile

dustysawyer

107 posts in 2323 days


#9 posted 03-24-2012 09:43 PM

Ingenuity at it’s finest! I’ve often thought about how handy something like this would be. Congratulations on getting past the idea stage and following through.

View Bob817's profile

Bob817

669 posts in 2077 days


#10 posted 03-24-2012 10:58 PM

I am also in the middle of making that jig it’s an awsome idea they had too bad there always trying to soak people on that site, they reel you in and then they send you to there web site to buy the plans. Yours is much better than theirs I like the way you added the height ajustment bolt. Good Luck with it.

-- ~ Bob ~ Newton, N.H.

View Steve Esterby's profile

Steve Esterby

285 posts in 2454 days


#11 posted 03-25-2012 12:51 AM

I like this. Mad scientist stuff!

-- steve...e-mail-themantelshop@hotmail.com........remember,the best teacher is repetition.

View Gerben's profile

Gerben

115 posts in 2051 days


#12 posted 03-25-2012 01:21 PM

Really cool.

Reminds me of a dremel mini tablesaw I saw a while back:
http://blog.makezine.com/2010/12/06/how-to-mini-tablesaw-from-a-rotary/

View Lee A. Jesberger's profile

Lee A. Jesberger

6830 posts in 3674 days


#13 posted 03-25-2012 01:24 PM

Nice job.

Lee

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

View Jeffery Mullen's profile

Jeffery Mullen

340 posts in 2512 days


#14 posted 03-26-2012 06:38 PM

I like this much beter then what they sell in the store. I use my dremel for allot of stuff and this would be a wonderfull table to build and add to my colletion. Thanks for sharing.

-- Jeffery Mullen

View StumpyNubs's profile

StumpyNubs

7239 posts in 2495 days


#15 posted 05-28-2012 12:54 PM

You should enter this into our jig contest! Email photos along with your LJ name to jigcontest@runbox.com. You might win!

-- Subscribe to "Stumpy Nubs Woodworking Journal"- One of the crafts' most unique publications: http://www.stumpynubs.com/

showing 1 through 15 of 18 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com