| Project by Dennis Hunter / Laura Merchant | posted 426 days ago | 1251 views | 7 times favorited | 11 comments | ![]() |
![]() |
I seen a wine bottle holder from another member the other day and I thought they were cool and would sell at the shows Laura and I do so I desided to try one. The Oak was my first, took it over to my local store tried a bottle and it worked but the first hole was a little big so I down sized it and tried it again with the Wlanut holder and it worked great so I made a few more. That night I had a vission of a wine glass holding the bottle so the next day I made one and it worked to. I did not have a wine bottle so I used a bottle of our favoret meat tenderizer to show the project. Well it holds a smaller bottle also, may be a good thing.
Thanks Dennis
-- http://www.landwoodworks.com (L an D Woodworks)
| Pin It |



























11 comments so far
jaykaypur
home | projects | blog
2497 posts in 576 days
#1 posted 426 days ago
You have taken a good idea and made it great. I think these will do well for y’all. Isn’t it amazing what we can think of and then do? Nice job on all of them.
-- Use it up, Wear it out --------------- Make it do, Or do without!
stefang
home | projects | blog
9460 posts in 1502 days
#2 posted 426 days ago
I like the wine glass idea and the table all the holders are sitting on too.
-- Mike, American in Norway
workerinwood
home | projects | blog
2488 posts in 1236 days
#3 posted 426 days ago
They look great! Very creative.
-- Jack, Albuquerque
Martyroc
home | projects | blog
2708 posts in 474 days
#4 posted 426 days ago
That’s cool Dennis, I was tempted to male a few of these but I wanted something that looked better than just a straight plank of wood, you had a great idea. I may need to steal that, thanks for posting
-- Martin ....always count the number of fingers you have before, and after using the saw.
will delaney
home | projects | blog
306 posts in 804 days
#5 posted 426 days ago
They all look great!!! I really like the natural edge ones.
Kayvon
home | projects | blog
51 posts in 474 days
#6 posted 426 days ago
I gotta make me some of these. I love the wine glass twist on this idea.
-- Kayvon
deon
home | projects | blog
1175 posts in 1194 days
#7 posted 426 days ago
Great idea!
-- Dreaming patterns
Dennis Hunter / Laura Merchant
home | projects | blog
476 posts in 493 days
#8 posted 425 days ago
Martyroc I am with you 0n not wanting a striaght plank. I have a few other ideas I am going to try with this holder lots of people drink wine and this is a great way to show the bottle off. I want to thanks everyone that has commented so far and I am glad some of you want to use the idea. I’ll post a blog on the angles I used.
-- http://www.landwoodworks.com (L an D Woodworks)
clieb91
home | projects | blog
2674 posts in 2103 days
#9 posted 422 days ago
Dennis, Nice selection of wood on these. I do like the wine glass one. I have seen them in various shapes around here, made a few laminated ones but need to try some shaped ones.
CtL
-- Chris L. "Don't Dream it, Be it."
The Head Charles
home | projects | blog
769 posts in 1341 days
#10 posted 420 days ago
Very nice. I like the live edge holder. What size hole did you land on for cutting?
-- Tim- http://www.asliceofwoodworkshop.com; Twitter-@asliceofwood; Facebook-http://www.facebook.com/asliceofwood
that1wood
home | projects | blog
60 posts in 442 days
#11 posted 406 days ago
Awesome designs. I really like the two with the live edge
-- that WOOD be cool..... JL
Have your say...