|Project by GlennsGrandson||posted 03-14-2012 05:21 PM||1369 views||1 time favorited||4 comments|
Until I can make a nicer sewing table with a lift in it this will have to do.
I made it all out of wood that I had in my shop. I had a recycled piece of some 1/2” soffit particle board that I got from a nearby construction site for the top, and then a piece of 1/4” yellow birch ply that I had on top of that for looks and a little more support. 2×4 frame and legs. I used 2×4’s for hangers for the shelf that the sewing machine sits on. I made an insert to fit around hte sewing machine starting with a cardboard template that I cut.
I think it measures 24” deep, 53” wide, and about 30” tall (I think it’s too tall, Ill probably have to knock some off the legs).
Someday I’d like to make this
Thanks for looking!
-- Grant - S/N Dakota