| Project by sawdustmaster | posted 435 days ago | 789 views | 3 times favorited | 9 comments |  |
 |
Out of necessity I built a single drawer hallway table. All solid cherry. Mortise and tenon joinery throughout. Hand cut half blind dovetails (fun to cut!) for the drawer. The legs are tapered, dont know if you can see it, and also my first build with something other than parallell and perpendicular lines. Finished with 6 coats of water based poly. The grain pattern on the top is really beautiful. The finish didnt turn out as glossy and smooth as I had hoped, but I guess you can only expect so much from foam brushes. Nest purchase is an HVLP machine. Thaks for looking!
-- --Now we are surrounded sir. "Excellent private, now we can attack in any direction."
| Pin It |
9 comments so far
dpow
home | projects | blog
374 posts in 1011 days
#1 posted 435 days ago
Great looking table. The tapered legs give it a delicate look and the cherry is a nice choice for this project. Thanks for sharing.
-- Doug
Beginningwoodworker
home | projects | blog
13225 posts in 1840 days
#2 posted 435 days ago
Nice looking table!
-- CJIII Future cabinetmaker
Dusty56
home | projects | blog
10508 posts in 1855 days
#3 posted 435 days ago
Very nice table design : )
-- When did quiet and quite become the same word ? I'm guessing about the same time as your and you're did.
woodworm
home | projects | blog
14104 posts in 1758 days
#4 posted 435 days ago
Very very nice work!
-- masrol, kuala lumpur, MY.
Norman1
home | projects | blog
74 posts in 934 days
#5 posted 435 days ago
Very classy design and guild.
-- Michael A. Norman
workerinwood
home | projects | blog
2486 posts in 1234 days
#6 posted 435 days ago
Great job, well done!!
-- Jack, Albuquerque
doncutlip
home | projects | blog
2808 posts in 1723 days
#7 posted 434 days ago
Nice table, great dovetails
-- Don, Royersford, PA
Francois Vigneron
home | projects | blog
99 posts in 486 days
#8 posted 434 days ago
Very nice table. Your hallway looks great. I love the grain on the top.
-- Francois Vigneron, Gif-sur-Yvette, France & Altadena, CA
descout
home | projects | blog
104 posts in 1261 days
#9 posted 353 days ago
Nice table! I am undertaking a project right now that I will attempt my first handcut dovetails. I can only hope mine look as good as yours!
Have your say...