• Advertise with us
Project by glynn posted 03-08-2012 08:37 PM 1490 views 3 times favorited 15 comments Add to Favorites Watch
617 No picture No picture No picture No picture No picture
Zoom Pictures

Im back, 617 pieces,maple and padauk,feature ring took four days,about 18 high and11 1/2 diameter.havent got to turn for a month sure enjoyed it ,hope you like it

-- jim nevada

15 comments so far

View Sam Shakouri's profile

Sam Shakouri

1092 posts in 2176 days

#1 posted 03-08-2012 09:10 PM

WOW, it is very nice. I was waiting for a new project from you and as I expected it was one of your best, and one of our best.

-- Sam Shakouri / CREATING WONDERS WITH WOOD.....Sydney,Australia....

View MShort's profile


1757 posts in 2506 days

#2 posted 03-08-2012 09:16 PM


I really like the feature ring that you did. I notice that grain is up and down from you other rings that are side to side. Have you done this with any other segmented projects? If so, do you see much wood movement with the grains going two directions? My initial thoughts are that the ring has so many small cut pieces that the movement is distributed and the grains are relieved by the cuts but I have not tried this and looking for some feedback from someone that has done this. Thanks.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View glynn's profile


306 posts in 2408 days

#3 posted 03-08-2012 09:23 PM

since the grain in the adjoining piece will be different I look at it like a laminated beam,they never twist or warp because forces are opposite,so far no problems

-- jim nevada

View Grandpa's profile


3246 posts in 1763 days

#4 posted 03-08-2012 10:18 PM

Very impressive! Thanks for sharing!

View Kent Shepherd's profile

Kent Shepherd

2703 posts in 2374 days

#5 posted 03-08-2012 10:24 PM

Beautiful piece!

-- She thought I hung the moon--now she just thinks I did it wrong

View peteg's profile


3470 posts in 1911 days

#6 posted 03-09-2012 03:03 AM

This is a beautie Jim, I love thoese little triangle pins they keep a flow going top to bottom, very nice design & great timber combination as well. Top job :: ))

-- Pete G: If you always do what you always did you'll always get what you always got

View deon's profile


2395 posts in 2114 days

#7 posted 03-09-2012 05:00 AM

Looks good

-- Dreaming patterns

View michelletwo's profile


2463 posts in 2104 days

#8 posted 03-09-2012 11:09 AM

depends on your area of the country, and the moisture swings. this may or may not have wood movement issues in this configuration. I like your featureband design

View ShopTinker's profile


884 posts in 1856 days

#9 posted 03-09-2012 11:42 AM

Awesome! I like everything about it, especially the feature band.

-- Dan - Valparaiso, Indiana, "A smart man changes his mind, a fool never does."

View MShort's profile


1757 posts in 2506 days

#10 posted 03-09-2012 04:52 PM

Thanks Jim for answering the question on the feature ring. I will have to give that try.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View Smitty_Cabinetshop's profile


12270 posts in 1706 days

#11 posted 03-09-2012 04:56 PM

Wow, what a piece of beautiful art! Unbelievable talent, Jim. Again, wow…

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive

View Rob Macdonald's profile

Rob Macdonald

75 posts in 1366 days

#12 posted 03-09-2012 06:31 PM

Nice one! Pls keep inspiring me


View socrbent's profile


329 posts in 1357 days

#13 posted 03-09-2012 07:16 PM

Looks beautiful! Rookie turner asks “What is the general process for the glue up? “

-- socrbent Ohio

View johnintecumseh's profile


120 posts in 2505 days

#14 posted 03-09-2012 08:59 PM

Hey Jim very nice work. your details are very precise. I like the feature design set up vertical . keep at it. keep smiling John

-- retired and smiling

View Bearpie's profile


2600 posts in 2106 days

#15 posted 03-10-2012 03:55 AM

Wow, Jim this is outstanding!

-- Erwin, Jacksonville, FL

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics