MDF moose head!

  • Advertise with us
Project by Toninho posted 03-07-2012 09:53 AM 4471 views 7 times favorited 21 comments Add to Favorites Watch

Good morning friends! As I like to use my scroll saw to cut this kind of work. I decided to cut this stag’s head is more detailed than another already cut! I have to learn to paint on MDF! Some useful information is always welcome! Hope you enjoy!

-- António Guerreiro

21 comments so far

View AcesandEights's profile


10 posts in 2979 days

#1 posted 03-07-2012 09:54 AM

That is cool. i like it a lot.

All the best.

View EMVarona's profile


437 posts in 3035 days

#2 posted 03-07-2012 10:32 AM

Wow! That’s very nice. How did you determine the variations in sizes of each sheet as well as the spacing between them. Was there any math involved or just played it by ear. Anyway what ever method you used I still think it is a masterpiece after all, art is beyond mathematics. More power.

-- Ed "Real happiness is one that you share."

View Eagle1's profile


2066 posts in 3264 days

#3 posted 03-07-2012 10:34 AM

Very interesting and cool. I must say that is a first for me to see something like that.

Thanks for posting:..

-- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened

View Monte Pittman's profile

Monte Pittman

30054 posts in 2538 days

#4 posted 03-07-2012 10:49 AM

Impressive. Obviously a lot of thought went into it before any actual work was done. Very cool.

-- Nature created it, I just assemble it.

View customsteve's profile


5 posts in 2471 days

#5 posted 03-07-2012 11:57 AM

Awsome man.
I have a feeling you just wing it from the start! either way I like it. arent scrole saws fun? I have a couple projects I think you would appreciate bud! Im new to this site, but i will start posting som pic asap! well painting MDF… that stuff will suck up the first two coats you give you have room for error. If it were me I would polyurethane it at least ten coats, show that piece off! dont hide it with paint! you have inspired me with MDF… you could even blow tourch it lightly before you polyurethane it too! That would give it shadowing! I just scrolled back up and saw this thing painted baby blue??? its still cool man but paint was made for drywall and hiding mistakes. Even with MDF

View SuperDave02's profile


141 posts in 3431 days

#6 posted 03-07-2012 12:32 PM

“moose head”? It must be one of those moose that lives near a nuclear power plants, discharge stream. Looks real nice. Must have taken a lot of time to saw out all those curves.

-- David South FLorida

View T. D. Reid's profile

T. D. Reid

275 posts in 2544 days

#7 posted 03-07-2012 12:35 PM

I don’t know why those birds are flying around, the damn things already picked clean. Great job! Cheers

-- Head to the shop its calling you – Todd

View michelletwo's profile


2767 posts in 3215 days

#8 posted 03-07-2012 12:59 PM

Moose & I live around each other & this is not a moose. Somebody led you astray on this. It’s more representative of a deer, because of the face shape & the antler configuration. None the less, it’s an interesting build.

View Ken90712's profile


17594 posts in 3388 days

#9 posted 03-07-2012 02:37 PM

Now that has to be one of the most creative ways I have ever seen anyone use MDF. Wow great, job.

-- Ken, "Everyday above ground is a good day!"

View Heidi Neely's profile

Heidi Neely

550 posts in 3374 days

#10 posted 03-07-2012 04:21 PM

Never seen anything like it= cool and original! I’m sure calling it a “moose head” was just an accidental slip. Very cool and modern looking though :)

-- Heidi :) “The only source of knowledge is experience”

View KnickKnack's profile


1094 posts in 3766 days

#11 posted 03-07-2012 04:59 PM

Muito bom – a Sintra tem muitos alces?

-- "Do not speak – unless it improves on silence." --- "Following the rules and protecting the regulations is binding oneself without rope."

View vakman's profile


301 posts in 2603 days

#12 posted 03-07-2012 07:33 PM

This is just like a scaled up version of the animal skeleton models I used to enjoy building as a kid:

Great job on this.

-- - Power is not revealed by striking hard or often, but by striking true. -

View BritBoxmaker's profile


4611 posts in 3236 days

#13 posted 03-07-2012 09:14 PM

Very entertaining. I think it looks good unpainted. Adds to the minimalism of the idea.

-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging.

View sotnas21's profile


24 posts in 2874 days

#14 posted 03-07-2012 10:19 PM

great job my friend go on

View whitewulf's profile


454 posts in 3136 days

#15 posted 03-08-2012 01:24 AM

I know Bullwinkle and thats not Bullwinkle…..............

-- "ButI'mMuchBetterNow"

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics