LumberJocks

End Grain Cutting board/ Hot Plate

  • Advertise with us
Project by NickiBurge posted 869 days ago 1209 views 1 time favorited 10 comments Add to Favorites Watch

I used pine, mahogany, white oak, cedar, and walnut. this was a very long prosess in trying to get this Hot plate as flat as i can using the planer and the box sander and a lot of other tools to make this look the best i can… Hope You Like It :)

-- Nicki Marie





10 comments so far

View KMT's profile

KMT

591 posts in 1258 days


#1 posted 869 days ago

Good work, looks like you succeeded in getting it flat and smooth. Nice design in the pattern

-- - Martin

View Martyroc's profile

Martyroc

2708 posts in 902 days


#2 posted 869 days ago

Beautiful work, looks great with wood selection you chose and the detailed edge.

-- Martin ....always count the number of fingers you have before, and after using the saw.

View kody's profile

kody

168 posts in 874 days


#3 posted 869 days ago

well done. what do you use for finish? If you don’t mind me asking.

View Ken90712's profile

Ken90712

14821 posts in 1784 days


#4 posted 868 days ago

Well done nice edge. You will have to ket us know how the pine holds up.

-- Ken, "Everyday above ground is a good day!"

View CalgaryGeoff's profile

CalgaryGeoff

936 posts in 1077 days


#5 posted 868 days ago

Very n

-- If you believe you can or can not do a thing, you are correct.

View CalgaryGeoff's profile

CalgaryGeoff

936 posts in 1077 days


#6 posted 868 days ago

Very nIce board. I like the wave pattern edges.

-- If you believe you can or can not do a thing, you are correct.

View KDO's profile

KDO

59 posts in 1365 days


#7 posted 867 days ago

Nice board !

View degoose's profile

degoose

6967 posts in 1950 days


#8 posted 866 days ago

Well I do… and I like the profile you routered on the edge…

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View JonH's profile

JonH

76 posts in 2682 days


#9 posted 858 days ago

She sanded it flat with a drum sander then carefully routed the edges over mulitple passes to prevent chip-out. She used a water based polyeurathane for a finish. It was better used for a hot plate since the material wasn’t hard enough to be a cutting board. Turned out really nice.

View NickiBurge's profile

NickiBurge

4 posts in 973 days


#10 posted 838 days ago

thank you for answering those questions for me mr. H :) and so far its working great :)

-- Nicki Marie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase