|Project by Preston13||posted 03-05-2012 02:53 PM||1618 views||0 times favorited||6 comments|
I cut the Legs, Sides, and Top to length with a Minor Saw. I used a jointer and plainer to smooth the edges of the legs and sides. I then took the four pieces i was using for my legs and biscuit jointed them. Once that dried I cut the #13 into the legs. I then used a roundover router for the legs and sides. I also used a styled router bit for my top. After I was done routing I used a Vermont Maple Stain with 3 coats and then covered it with a water based gloss with another 3 coats.