Another carving cross

  • Advertise with us
Project by Walther von Einik posted 03-03-2012 08:13 AM 2310 views 10 times favorited 13 comments Add to Favorites Watch

There is another basswood cross! 5 1/4×8 inches. Toning, wax. Polish. The cross was made from the one piece of wood, without separate details.


13 comments so far

View Jimthecarver's profile


1123 posts in 3362 days

#1 posted 03-03-2012 10:58 AM

Beautiful … would youth mind if I gave this a try?

-- Can't never could do anything, to try is to advance.

View helluvawreck's profile


24867 posts in 2443 days

#2 posted 03-03-2012 12:12 PM

This is beautiful and the carving is so crisp and clean.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View jeffl's profile


288 posts in 2887 days

#3 posted 03-03-2012 12:18 PM

Nice carving.

-- Jeff,

View Lee A. Jesberger's profile

Lee A. Jesberger

6823 posts in 3556 days

#4 posted 03-03-2012 12:39 PM

Very nice work.

What kind of carving tools are those?


-- by Lee A. Jesberger

View  woodshaver (Tony)   's profile

woodshaver (Tony)

4450 posts in 2929 days

#5 posted 03-03-2012 01:12 PM

Very nice Walther. I appreciate you sharing your work with us. We get to see the finish but for me I also like to think about how it got to look so nice!

-- St Augustine FL, Experience is the sum of our mistakes!

View 3Gwoodguy's profile


163 posts in 2269 days

#6 posted 03-03-2012 02:34 PM

terrific work! true craftsmanship!

-- "The beatings will continue until moral improves" -- Bart Ridings, Illinois

View Kenny2946's profile


46 posts in 1865 days

#7 posted 03-03-2012 04:04 PM

Very nice…

-- Kenny, New York

View Walther von Einik's profile

Walther von Einik

191 posts in 1880 days

#8 posted 03-03-2012 07:24 PM

Thanks for all!Sorry for my English – it’s not good. I wanted to carve this cross very long time ago, I made a pictre of this, but all my toolsare in Russia, we didn’t take them with us here. I made some tools from the small knives. Then I’ve met a Boris, whom send me a gift – those tools. Very wanted to make this cross, so I’ve started to do it. And did it very fast – it’s a very good tools! Very good configuration. They’re works byself.
Boris has a patent in America. Boris do those tools here, in America. I’ll give his mail for you here:

I’ll do the blog for another cross – like this. This cross I did very fast, so didn’t have the time for collect information for blog. So I’ll do the same cross and you’ll see the blog.


View Roman - THE BOOTMAN's profile


823 posts in 2262 days

#9 posted 03-03-2012 07:26 PM

It is a work of art. Our family is of the Orthodox faith and we would have been proud to have this cross in our house. Thanks for sharing. Roman

-- Roman:... These Boots Were Made For 'Talkin'!

View Walther von Einik's profile

Walther von Einik

191 posts in 1880 days

#10 posted 03-03-2012 07:51 PM

To Jimthecarver:

You can carve it if you want, I can give the picture (scheme) of it.


View Walther von Einik's profile

Walther von Einik

191 posts in 1880 days

#11 posted 03-03-2012 07:51 PM

View Bearpie's profile


2601 posts in 2594 days

#12 posted 03-03-2012 08:58 PM

I love it!

-- Erwin, Jacksonville, FL

View Walther von Einik's profile

Walther von Einik

191 posts in 1880 days

#13 posted 03-03-2012 09:36 PM

If you’ll look closer for this pictre, there are pencil’s lines. It’s almost the waving of whole cross. encircled part – put on the waving Orthodox symbol, tied up in the picture.

Sorry for my bad english. If you’ll don’t undrstand something – ask me, I’ll try to explain better.


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics