| Project by Russell | posted 451 days ago | 713 views | 1 time favorited | 3 comments |  |
 |
A hardwood bookshelf that I built for a friend. The front supports are connected to the main shelves by box joints that are held in by friction. The Back supports are connected to the main shelves by hand tightened bolts. The Bookshelves are easily disassembled, and assembly takes less than three minutes. I could also climb on the bookshelves if need be; a little creaky but the shelves definitely hold my 180 pounds.
Enjoy
| Pin It |
3 comments so far
bugz
home | projects | blog
380 posts in 835 days
#1 posted 451 days ago
Very nicely done, and strong to hold 180#’s. nice shelfes.
-- Bob, Lewistown, Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain
doncutlip
home | projects | blog
2808 posts in 1727 days
#2 posted 451 days ago
Cool design, nice piece
-- Don, Royersford, PA
Martyroc
home | projects | blog
2708 posts in 477 days
#3 posted 450 days ago
Nice design, is that purple heart you used for the supports?
-- Martin ....always count the number of fingers you have before, and after using the saw.
Have your say...