Interior of woodshop

  • Advertise with us
Project by Ron Messersmith posted 02-28-2012 01:01 AM 4042 views 3 times favorited 20 comments Add to Favorites Watch

These are some photos depicting the typical condition of my woodshop. I can have as many as 30 projects underway at a time so the shop can get pretty messy real quick. I try to keep it fairly clean and organized for safety reason but I still allow to get out of control occassionally!!

-- Jupiter

20 comments so far

View a1Jim's profile


113162 posts in 2425 days

#1 posted 02-28-2012 01:35 AM

Great looking shop Ron I like all that cool equipment too.

-- Custom furniture

View SteveGaskins's profile


343 posts in 1435 days

#2 posted 02-28-2012 01:37 AM

Ron, nice shop and equipment! What brand combination TS do you have?

-- Steve, South Carolina,

View Martyroc's profile


2708 posts in 1154 days

#3 posted 02-28-2012 01:52 AM

I need a shop that size, nice setup.

-- Martin ....always count the number of fingers you have before, and after using the saw.

View NormG's profile


4820 posts in 1851 days

#4 posted 02-28-2012 02:35 AM

All that really nice equipment must make you very proud. Real nice setup

-- Norman

View Grandpa's profile


3239 posts in 1523 days

#5 posted 02-28-2012 03:26 AM

NICE, NICE, NICE!! You have a great shop and some really nice tools. Thanks for sharing.

View Bobsboxes's profile


795 posts in 1511 days

#6 posted 02-28-2012 03:38 AM

Super looking shop, and you have some very nice projects you have posted. Thanks for sharing. And welcome to lumber jocks, home of a great and talented bunch of guys and gals, always willing to help.

-- Bob, Lewistown, Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View Ron Messersmith's profile

Ron Messersmith

82 posts in 1132 days

#7 posted 02-28-2012 04:05 AM

Hi Steve,
My table saw combination is a MiniMax CU 300. I traded in all my Powermatic Machines for this one for a smaller footprint in the shop. Except for the space saved, I regret changing over. I don’t like the right tilting arbor. If I have a problem with the machine (and I have on 2 occassions), I have to have a tech rep come all the way up to Washington State from Houston, Tx to work on it. I couldn’t even find a local machine shop who could replace the drive chain for the infeed rollers on the thickness planer. I liked my old Powermatic 66. All my jigs were made for that machine.

Have a great day!!


-- Jupiter

View robert triplett's profile

robert triplett

1528 posts in 1952 days

#8 posted 02-28-2012 05:00 AM

Thanks for the pictures of your shop. but now I am drooling over your shop and your wood!! Looks like you could have 30 projects going in there. I can see why you would need a separate wood building to keep this space functioning. Find a way to bribe your wife!

-- Robert, so much inspiration here, and now time to work!!!

View usnret's profile


184 posts in 1356 days

#9 posted 02-28-2012 05:25 AM

What do the women in the strip shop look like? Sorry that was my sailor mind typing there. Nice setup of buildings and nice collection of tools.

-- Chief Petty Officer USN(RET) 1991-2011

View Ken90712's profile


15407 posts in 2036 days

#10 posted 02-28-2012 10:58 AM

What a great looking shop. Very cool.

-- Ken, "Everyday above ground is a good day!"

View helluvawreck's profile


16667 posts in 1714 days

#11 posted 02-28-2012 12:17 PM

Ron, your shop is real nice. Since you have as many as 30 projects going on at once I assume that you are also a juggler as well as a woodworker. Your shop looks like it would be a pleasure to work in and doesn’t look that messy to me. Welcome to Lumberjocks.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View OldBoatMan's profile


18 posts in 1279 days

#12 posted 02-28-2012 01:16 PM


Such a range of equipment. Is this a commercial venture? How many people use your shop anyhow?

View chopnhack's profile


371 posts in 1242 days

#13 posted 02-28-2012 01:51 PM

Wow Ron, 30 projects! I hope you keep a notebook! If I had that many projects in my head at once I think I would come to a complete standstill, LOL :-) Great shop!!

-- Sneaking up on the line....

View KMT's profile


593 posts in 1510 days

#14 posted 02-28-2012 03:37 PM

For some reason my shop seems a lot smaller when I walked in it today. :[ . Great shop you have.

-- - Martin

View Beginningwoodworker's profile


13347 posts in 2521 days

#15 posted 02-28-2012 03:41 PM

Nice shop!

showing 1 through 15 of 20 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics