or Join Now!
home | projects | blog
9904 posts in 2143 days
Preview this project card
6195 posts in 1899 days
#1 posted 02-27-2012 02:04 AM
Nice job, looks like you are covered on the sharpening front.
11386 posts in 2141 days
#2 posted 02-27-2012 02:17 AM
Alright William. Very nice.
-- Superdav "No matter where you go - there you are." http://chiselandforge.com
2711 posts in 1607 days
#3 posted 02-27-2012 02:22 AM
Nice job, I have seen several sharpening stations today, are you people trying to tell me something?!?
-- Martin ....always count the number of fingers you have before, and after using the saw.
114922 posts in 2878 days
#4 posted 02-27-2012 02:24 AM
It looks like your ready to get sharping ,enjoy.
-- http://artisticwoodstudio.com Custom furniture
#5 posted 02-27-2012 02:27 AM
Thank you all. Yes, Martyoc. We’re telling you that you may need one too.
19059 posts in 1976 days
#6 posted 02-27-2012 04:56 AM
Still keeping yourself busy I see. Nice job. Now then, go let’s see a video of your sharpening prowess!
I need to learn how to sharpen stuff. What should I sharpen? I know my witt!
-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?
19221 posts in 2105 days
#7 posted 02-27-2012 09:03 PM
oh yea! very nice. I’ll bet there are a bunch o those really sharp thingies around close by, and/or some dull ones waiting
-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com
301 posts in 2374 days
#8 posted 02-28-2012 03:54 AM
Wish I had a setup like that for sharpening. Very nice William.
-- Trees, a wonderful gift --Joe--
#9 posted 02-28-2012 04:07 AM
Sharp one’s now Roger.
I wound up not using the station in photo #2 at all to sharpen these.I started thinking that, now that I have options, how I wanted to go about sharpening my chisels. I’ve been looking a lot into Paul Sellers methods and knew that was the way I wanted to go. However, that means that it can be done on diamond or the oil stones that I have. I decided to use both. I had several new chisels that have never been used or sharpened. Also, I had two badly damaged chisels. So I used the diamond plates to get them fixed up and farily sharp to start with. Then I moved over to the oil stones to becaus I have finer grits with them. I skipped the course oil stone, because I felt that since it was courser than the finest diamond plate, that would be going backwards. I am happy with the outcome. I’m not saying that all of them are perfect. I still have work to do on my method, but it will come. I do know you can shave hair with them though. I know they will dig in if you run them across your fingernail. I checked these two things. That is great, in my opinion, for a guy that has always cleared away from sharpening chisels as much as possible.
Now, for the lessone of the day.If your chisels are really sharp, check hair, check paper, check finger nails. Do not push the corner into your finger though while carrying them. When they are that sharp, they also cut skin.
3297 posts in 1863 days
#10 posted 02-29-2012 01:20 AM
Can I send you my blades?
-- Shameless - Winner of two Stumpy Nubs Awards
#11 posted 02-29-2012 01:40 AM
Sure, if I can keep them till you come get the personally. I like shop visitors.
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics