Arts & Crafts End Table

  • Advertise with us
Project by TexasJim posted 02-22-2012 09:30 PM 2673 views 8 times favorited 12 comments Add to Favorites Watch

These are two Arts and Crafts style end tables I built for our bedroom. They are made of Honduran Mahogany. Finish is brown mahogany Transtint dye in denatured alcohol followed by Seal-A-Coat by General Finishes and then multiple coats of GF Arm-R-Seal. Each table has 50 mortise and tenon joints. The stiles and rails are m&t and the slats on the sides are as well. I have seen several projects where slats like those were installed in a groove with spacers in between but I made separate M&T joints for each one. I have about 80 hours in the 2 tables.

-- If the world was a logical place, men would be the ones who ride horses sidesaddle.

12 comments so far

View a1Jim's profile


117328 posts in 3775 days

#1 posted 02-22-2012 09:32 PM

Outstanding Arts and crafts end tables, a super build and the finish gives them an extra rich look.

-- wood crafting & woodworking classes

View CampD's profile


1731 posts in 3684 days

#2 posted 02-22-2012 10:38 PM

Very nice, I have the same project on the burner.

-- Doug...

View doncutlip's profile


2832 posts in 3754 days

#3 posted 02-22-2012 11:00 PM

Really sharp, I like them

-- Don, Royersford, PA

View MasterSergeant's profile


1372 posts in 2886 days

#4 posted 02-22-2012 11:17 PM

What a wonderful nightstand! I have been looking for ideas for our nightstands, I believe you provided our solution!

-- Kelly, woodworker under construction

View NormG's profile


6283 posts in 3202 days

#5 posted 02-23-2012 01:31 AM

You did a wonderful job with all those M & T’s, looks great

-- Norman - I never never make a mistake, I just change the design.

View Howie's profile


2656 posts in 3121 days

#6 posted 02-23-2012 01:37 AM

Fine looking project. Good job.

-- Life is good.

View HillbillyShooter's profile


5811 posts in 2490 days

#7 posted 02-23-2012 02:13 AM

Nicely done.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View dpow's profile


503 posts in 3042 days

#8 posted 02-23-2012 02:20 AM

Oooh, I like those stands. Once again, you can’t go wrong with the A&C style. Thanks for sharing.

-- Doug

View Hallmark's profile


432 posts in 3304 days

#9 posted 02-23-2012 03:49 AM

Really sharp looking, love how the color turned out.

-- Style is simple, but not my execution of it.

View konaman's profile


83 posts in 3829 days

#10 posted 02-23-2012 08:05 PM

Very nice work, and great color

View Jason_31's profile


30 posts in 2232 days

#11 posted 10-31-2012 09:24 PM

these are great! your lower shelves are more practical than mine i will tell you that! very nice

View Steve Cherry's profile

Steve Cherry

171 posts in 2029 days

#12 posted 02-23-2014 04:00 PM

They are beautiful; also on my list of projects to be done. Nice work.

-- Steve - Front Royal, VA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics