or Join Now!
Chairs made of oak.Bakrest-bent laminated.
-- почти столяр
home | projects | blog
58 posts in 1683 days
Preview this project card
1324 posts in 2422 days
#1 posted 02-20-2012 12:28 PM
Man… those sure beat the heck out of the store bought ones. Nice job on those.
-- I just got done cutting three boards and all four of them were too short. (true story)
T. D. Reid
275 posts in 1437 days
#2 posted 02-20-2012 12:46 PM
Great job! Lots of little parts there, were you able to mass produce them? Cheers
-- Head to the shop its calling you – Todd
#3 posted 02-20-2012 01:10 PM
were you able to mass produce them?Actualy-I wasn’t, but I was long of time for this: it took almost 2 weeks.
3769 posts in 2668 days
#4 posted 02-20-2012 02:20 PM
Very nice!I agree, they are much better then store bought junk.
They look comfortable.
-- Eric down in sunny Florida.
113838 posts in 2669 days
#5 posted 02-20-2012 05:11 PM
Very nice folding chairs.
-- http://artisticwoodstudio.com Custom furniture
6 posts in 879 days
#6 posted 07-04-2013 09:52 PM
Would you be willing to share plans for the chair?
-- Shannon, Florida
8391 posts in 2525 days
#7 posted 07-04-2013 11:05 PM
He’s from Russia and hasn’t been on here in about 3 months.
-- Gary, DeKalb Texas only 4 miles from the mill
#8 posted 07-05-2013 08:05 PM
I’ made chairs using one factory made as a sample. I’ll ask my friend to give me one of those chairs to measure dimensions.
8554 posts in 3144 days
#9 posted 07-05-2013 08:31 PM
Those are super COOL nice chairs!
The bent laminated backs interests me..... possible to show pictures of your clamping Mold as well as the Joint?
Thank you very much… You did good!
-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"
#10 posted 07-05-2013 08:56 PM
The joint is “simple” mortise and tenon, it was a challenge to do tenons for me, cause this was my second woodworking project in my life, first chair backrest tenons was made by handtools, but then I used table saw and Mold made of multiple layers of MDF. Mold width is distance between styles plus double deep of tenon. It is difficult to me to explain, I’ll better try to do some drawings. Please stand by.
#11 posted 07-05-2013 10:17 PM
here is drawing. These chairs have laminated backrests.Glue strips in mold, do not remove workpiese from mold, just reposition clamps every next step for they do not interfere with tools or fense or wise, then cut away waste with chisel or japanes saw (pos.1 on drawing),cut tenons on tablesaw (2 and 3),cut shoulders with handsaw and clean with chisel (4)
#12 posted 07-05-2013 11:37 PM
COOL way you made those tenons!!
I had visions of BENDING! LOL... your way is COOL!!
Thank you very much…
I gotta say, you did extremely well in making those chairs!
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics