or Join Now!
i used a 1×8 and cut out the center for the the saw and used half lap joitns
home | projects | blog
12 posts in 2052 days
Preview this project card
7057 posts in 2402 days
#1 posted 02-15-2012 12:04 AM
I love to see a homemade shop fixture! Thanks for posting!
-Jim; aka “Stumpy Nubs”
” Blue Collar Woodworking? That's the best show since Hawaii 5-0! ” -The Podunk Journal
-- Subscribe to "Stumpy Nubs Woodworking Journal"- One of the crafts' most unique publications: http://www.stumpynubs.com/
19286 posts in 2277 days
#2 posted 02-15-2012 01:30 AM
A rough & tumble, down & dirty bench, that will serve you well. Nice job.
-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?
8010 posts in 2444 days
#3 posted 02-15-2012 02:13 AM
Creative use of construction material! LOL I have a similar bench, put together with screws so I can make a different one later. LOL I used 3/4 tounge and groove fir that I had with astained and polyed top.
-- Cau Haus Designs, Thomas J. Tieffenbacher
2712 posts in 1908 days
#4 posted 02-15-2012 04:58 AM
Good mitre station, you should get plenty of use from it.
-- Martin ....always count the number of fingers you have before, and after using the saw.
3596 posts in 2080 days
#5 posted 02-15-2012 07:38 AM
nine is made very simular I have decided to replace it with norms table i got the video and the plans to make the new one should be great the one i have is 10 years old and ill hate to toss it out it has been good but i want the rest of the features the new bench offerd like closed in storage and a way for it to match up to my radial arm saw just like norms congrats on this build it will serve you well mine did
-- Please check out my new stores http://woodratnest.com and http://woodshopstore.com
17249 posts in 2791 days
#6 posted 02-15-2012 04:00 PM
Very effective. Well done.
-- Ken, "Everyday above ground is a good day!"
68 posts in 1931 days
#7 posted 02-15-2012 05:12 PM
Nice solid setup.
-- TJ - Perryville, Missouri
#8 posted 02-16-2012 03:50 AM
i miss printed the beginings. i used 2×8 as you can most likely tell. This table is very strong and ridgid, i will get some more pics soon
191 posts in 1893 days
#9 posted 02-17-2012 01:47 PM
I like how you notched it at the corners. Nice work!
-- I played with Legos as a kid and I never had the part I thought I needed, so I learned to improvise. Now I'm an engineer with a woodworking hobby.
Go to Pulse page »
©2017 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics