Its A Fine Cut Saw

  • Advertise with us
Project by David Kennedy posted 02-12-2012 10:02 PM 2444 views 2 times favorited 14 comments Add to Favorites Watch

I built this to protect. The cardboard box it came in did not offer much protection. Just some old pine and scrap mohogany, and some 1/4 oak plywood.

-- Dave, W.V.

14 comments so far

View Roger Clark aka Rex's profile

Roger Clark aka Rex

6940 posts in 3584 days

#1 posted 02-12-2012 10:08 PM

Nice tool box, a good tool needs a good place to stay when not being used.

-- Roger-R, Republic of Texas. "Always look on the Bright Side of Life" - An eyeball to eyeball confrontation with a blind person is as complete waste of Time.

View David Kennedy's profile

David Kennedy

80 posts in 2472 days

#2 posted 02-12-2012 10:11 PM

We all need a good box for a good tool.

-- Dave, W.V.

View FirehouseWoodworking's profile


718 posts in 3423 days

#3 posted 02-12-2012 10:36 PM

Very nicely done. It is indeed a fine cut saw – in a finely cut box!

-- Dave; Lansing, Kansas

View Jerry's profile


70 posts in 2796 days

#4 posted 02-12-2012 10:51 PM

Very nice, well done!!

-- We are all one decision away from stupid.

View patron's profile


13630 posts in 3491 days

#5 posted 02-12-2012 11:33 PM

well done david

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Dusty56's profile


11822 posts in 3837 days

#6 posted 02-12-2012 11:55 PM

Very nice indeed : )

-- I'm absolutely positive that I couldn't be more uncertain!

View Roger's profile


20949 posts in 2953 days

#7 posted 02-13-2012 12:42 AM

a gr8 storage box

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View will delaney's profile

will delaney

326 posts in 2785 days

#8 posted 02-13-2012 12:49 AM

Nice! I should treat my tools that nice.

View BentheViking's profile


1782 posts in 2713 days

#9 posted 02-13-2012 02:00 AM

I’ve got one of these saws with a very poor condition box…might have to make one of these too!

-- It's made of wood. Real sturdy.--Chubbs Peterson

View gfadvm's profile


14940 posts in 2840 days

#10 posted 02-13-2012 02:12 AM

That’s a great looking storage box for a nice tool. I too like to make fancy boxes to store shop stuff in. If it had ‘Shipwright hinges’ it would be perfect! LOL Sorry, but I’m addicted to those hinges and just look for an excuse to make more.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View Dennisgrosen's profile


10880 posts in 3265 days

#11 posted 02-13-2012 06:44 AM

shuoldn´t there have been place for the mitterstand too …. LOL
good looking box …well done

take care

View StumpyNubs's profile


7656 posts in 2950 days

#12 posted 02-13-2012 02:20 PM

There’s a guy who knows how to treat a tool! Thanks for posting!

-Jim; aka “Stumpy Nubs”
Blue Collar Woodworking? FINALLY, a woodworking show for us morons! ” -The Hoboken Evening Review

-- Subscribe to "Stumpy Nubs Woodworking Journal"- One of the crafts' most unique publications:

View Holt's profile


276 posts in 2779 days

#13 posted 02-13-2012 05:44 PM

Looks like about the right size to hods a HF multi-tool!

-- ...Specialization is for insects.

View Bob817's profile


673 posts in 2532 days

#14 posted 04-26-2012 01:46 PM

Nice BOSCH tool box, nice detail.

-- ~ Bob ~ Newton, N.H.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics