| Project by ronster20 | posted 477 days ago | 609 views | 0 times favorited | 3 comments |  |
 |
My WIFE decided we need a picnic table. Since nearly all of us are over 6 feet, I wanted to build a table that we did not smash our knees on getting down on or up from. This what I came up with. 8ft. long , 3ft. wide and 3 ft. tall. The seat height is 17 1/2 in. Finally a picnic table my knees stand a chance on.
-- ronnie, hillsboro, tn.
| Pin It |
3 comments so far
a1Jim
home | projects | blog
87310 posts in 1748 days
#1 posted 477 days ago
Great looking table Ronnie,good job.
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
ohwoodeye
home | projects | blog
767 posts in 1324 days
#2 posted 477 days ago
6’8”...........I know the feeling. This looks great. I’m a little concerned about the “shin buster” center stretcher. It appears in pictures #3 & 4 but I don’t see it in the first two.
-- Directions are just the Manufacturer's opinion on how something should be assembled. ----Mike, Waukesha, WI
ronster20
home | projects | blog
8 posts in 505 days
#3 posted 477 days ago
The center beam is actually 23 in. from the seat edge. Gives plenty of room for the legs underneath.
-- ronnie, hillsboro, tn.
Have your say...