Out Door Patio Glider

  • Advertise with us
Project by bigpops0259 posted 01-30-2012 05:15 PM 2832 views 2 times favorited 9 comments Add to Favorites Watch

Out Door Patio Glider
Made from Pressure treated wood
Did two Matching to set by outside firepit
Stainless Steel screws and carriage bolts
Used router carver set to carve design

-- Marty Ohio

9 comments so far

View ElmoSr's profile


241 posts in 2446 days

#1 posted 01-30-2012 05:19 PM

i like this i have always wanted to build one ,do you have a blog on making it

-- ElmoSr,Ga. Life is Hard by the Yard,,,But a Cinch by the Inch

View Bobsboxes's profile


1091 posts in 2083 days

#2 posted 01-30-2012 05:22 PM

Great glider, good looking build.

-- Bob in Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View a1Jim's profile


115172 posts in 2996 days

#3 posted 01-30-2012 05:25 PM

A first rate glider great job

-- Custom furniture

View Jim Finn's profile

Jim Finn

2390 posts in 2341 days

#4 posted 01-30-2012 07:29 PM

Very nice. They are fun to build.

-- "You may have your PHD but I have my GED and my DD 214"

View nobuckle's profile


1120 posts in 2180 days

#5 posted 01-30-2012 07:38 PM

That’s a really nice glider. It should last a good long time since it’s made of pressure treated lumber. Did you use bearings in the gliding mechanism?

-- Doug - Make an effort to live by the slogan "We try harder"

View hhhopks's profile


645 posts in 1797 days

#6 posted 01-30-2012 07:52 PM

Good looking glider.

I am just curious. Most if not all the benches sold at the stores, have seats a little short to support the legs better. Did you lengthen if slightly?

-- I'll be a woodworker when I grow up. HHHOPKS

View david38's profile


2380 posts in 1763 days

#7 posted 01-30-2012 11:33 PM

looks great . I built one the only thing i every built from plans did not turn out well. Put on porch my wife does not like it. It sets bad and the back is not high enough.

View Don Johnson's profile

Don Johnson

650 posts in 2200 days

#8 posted 01-31-2012 12:26 PM

So that’s what a glider is! LOL

Excellent work.

-- Don, Somerset UK,

View bigpops0259's profile


302 posts in 3569 days

#9 posted 01-31-2012 03:26 PM

Thanks guys I used Bronze bushings as a bearings around carriage bolts but only in moving arm, The bench is 19” at seat height and 20” deep at seat area, which makes it very comfortable with a 15 degree tilt that well forces a little recline. Sorry I’m not much for blogging projects. But if you have question I’d be happy to try to answer, I don’t use plans I make what I feel it should be. Both were fun to build and are identical.

-- Marty Ohio

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics