or Join Now!
all 6/4 pine except the lower cross braces. the top has scalloped edge top and bottom. 5 digree splay to legs. have the sofa table to assemble yet. oil and wax finish
home | projects | blog
43 posts in 1186 days
Preview this project card
113209 posts in 2452 days
#1 posted 01-29-2012 03:57 AM
Those are some terrific tables ,great job.
-- http://artisticwoodstudio.com Custom furniture
2832 posts in 2431 days
#2 posted 01-29-2012 04:30 PM
I like pine, and you did a great job on that table
-- Don, Royersford, PA
307 posts in 2587 days
#3 posted 01-30-2012 01:44 AM
I like the scallops, how did you do them? From the picture I’m guessing table or bandsaw some angles, then angle grinder or powersander to the shape you wanted?
-- "That which has in itself the greatest use, possesses the greatest beauty." - http://www.willmego.com/
#4 posted 01-31-2012 04:50 AM
Hi Will. i started with a squared up edge. drew a line all the way around the edge about 3/8 down from the top lip and also from the bottom.then comes the template for the scallop. i made it from bristle board . make a 12 inch square and divide it into a 1 inch grid.take your compass and make an 8 or 10 inch circle making sure that the two outside portions of the circle are equal.i then cut the circle in half and i then can move the circle grid in towards the center of the table to make the scallops bigger. i will post a series of pics for you when i find the template . it will take all the guesswork out of it and then i just use a belt sander and clean up with a palm sander
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics