LumberJocks

Cherry jewelry box

  • Advertise with us
Project by Phil277 posted 811 days ago 1104 views 1 time favorited 9 comments Add to Favorites Watch

This jewelry box is made of cherry. The inside is lined with green flocking. All of the parts were made with traditional woodworking tools and the decorative carvings were done with a CNC router. The design was inspired by a famous chip carver, Wayne Barton. You might notice that there is more than one version pictured, I’ve made two of these.

Phil





9 comments so far

View a1Jim's profile

a1Jim

109270 posts in 2077 days


#1 posted 810 days ago

Very nice box with super details .

-- http://artisticwoodstudio.com Custom furniture

View kolwdwrkrsgirl's profile

kolwdwrkrsgirl

550 posts in 1674 days


#2 posted 810 days ago

Really stunning looking boxes…nice job :)

-- Heidi :) “The only source of knowledge is experience”

View doncutlip's profile

doncutlip

2832 posts in 2056 days


#3 posted 810 days ago

Spectacular, great design

-- Don, Royersford, PA

View woodworm's profile

woodworm

14124 posts in 2091 days


#4 posted 810 days ago

Cool carved boxes!

-- masrol, kuala lumpur, MY.

View Phil277's profile

Phil277

142 posts in 823 days


#5 posted 809 days ago

Thanks everyone for the compliments. I had a lot of fun designing and building this box.

Phil

View itsmic's profile

itsmic

1419 posts in 1618 days


#6 posted 809 days ago

Nice looking box, the design and execution are very fine, thanks for sharing

-- It's Mic Keep working and sharing

View BigDan2's profile

BigDan2

23 posts in 255 days


#7 posted 225 days ago

simply wonderfull

-- BigDan

View oldnovice's profile

oldnovice

3255 posts in 1868 days


#8 posted 21 days ago

That is really beautiful!
The woven sides are gorgeous!

What CNC did you use, and do you have the cut files available!

-- "I never met a board I didn't like!"

View Phil277's profile

Phil277

142 posts in 823 days


#9 posted 21 days ago

Mr. Oldnovice,

thanks for the response. My CNC is a Shopbot. The software I use is V-Carve Pro from Vectric.com.
You would need to have their software to run the files. They also provide a monthly free project. One of them is the “Paradise Box” which is very similar to my box. Their plans include much more information on building the projects than I could. I’d be happy to answer any questions.
This is a link to their free projects page.
http://www.vectric.com/cool-stuff/projects.html

Phil

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase