LumberJocks

Cheap Rabetting jig for router table - Accesorio barato para rebajes en la fresadora de mesa

  • Advertise with us
Project by Marpintero posted 01-23-2012 06:18 PM 3242 views 9 times favorited 13 comments Add to Favorites Watch

Use if you need to make rabbets and not feel like buying a rabbeting bit. You just need a suitable diameter straight bit (pictured is a 3/4’’ bit to make a 1/4’’ rabbet).
Use a C-clamp to set either the accessory, safety first.
I hope it helps someone.
Greetings.
Martin

Úsese en caso de necesitar hacer rebajes y no tener ganas de andar comprando una fresa rebajadora. Sólo se necesita una fresa recta del diámetro adecuado (en la foto es de 19mm para hacer un rebaje de 6mm).
Utilizar una prensa C para fijar bien el accesorio, la seguridad ante todo.
Espero que le sirva a alguien.
Saludos.
Martín

-- Our lives are marked and bound together by concentric rings. Martín - Argentina





13 comments so far

View PurpLev's profile

PurpLev

8522 posts in 2808 days


#1 posted 01-23-2012 06:29 PM

nice!

-- ㊍ When in doubt - There is no doubt - Go the safer route.

View a1Jim's profile

a1Jim

114339 posts in 2737 days


#2 posted 01-23-2012 06:31 PM

Good Idea

-- http://artisticwoodstudio.com Custom furniture

View lew's profile

lew

10814 posts in 2915 days


#3 posted 01-23-2012 06:32 PM

Now that’s COOL!!

Lew

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View patron's profile

patron

13449 posts in 2501 days


#4 posted 01-23-2012 06:46 PM

buenole done martin

simple

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Bobsboxes's profile

Bobsboxes

980 posts in 1824 days


#5 posted 01-23-2012 07:35 PM

Super idea, I am doing back of case today, I’ll give it a try. Thanks

-- Bob in Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View bob62's profile

bob62

160 posts in 1777 days


#6 posted 01-23-2012 08:22 PM

Now that’s what I call be creative! Great Job!

-- Robert, Mississippi, http://www.lunberjocks.com

View Tootles's profile

Tootles

735 posts in 1662 days


#7 posted 01-24-2012 02:18 AM

That’s clever! Thanks for sharing.

-- I may have lost my marbles, but I still have my love of woodworking

View BigTiny's profile

BigTiny

1667 posts in 2048 days


#8 posted 01-24-2012 02:52 AM

Muy bueno, amigo!

Paul

-- The nicer the nice, the higher the price!

View tjdv's profile

tjdv

62 posts in 1853 days


#9 posted 01-24-2012 03:27 AM

Nice. Easy to make with great results. My kind of jig.

-- At least in the Navy no one ever told me to put the seat down.....

View gfadvm's profile

gfadvm

14339 posts in 1850 days


#10 posted 01-24-2012 04:08 AM

Very innovative jig. I use my router table fence to do this but your jig appears to do a great job. Thanks for posting this.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View devann's profile

devann

1986 posts in 1852 days


#11 posted 01-24-2012 05:25 AM

Tengo que probar esto

I have to try this

-- Darrell, making more sawdust than I know what to do with

View stefang's profile

stefang

15140 posts in 2494 days


#12 posted 01-24-2012 06:29 PM

Very useful idea. Thank you.

-- Mike, an American living in Norway.

View StumpyNubs's profile

StumpyNubs

6624 posts in 1960 days


#13 posted 05-28-2012 12:59 PM

You should enter this into our jig contest! Email photos along with your LJ name to jigcontest@runbox.com. You might win!

-- Subscribe to "Stumpy Nubs Woodworking Journal"- One of the crafts' premiere online publications: http://www.stumpynubs.com/

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com