| Project by Borgmc1 | posted 485 days ago | 667 views | 0 times favorited | 6 comments |  |
 |
Inside layer is Oak, Middle layer is Purple Heart, Outside layer not sure.
Finish;
Outside, Acrylic
Inside , FDA approved epoxy
Holds approximately 13oz
5 15/16” tall
3 1/8” diameter
| Pin It |
6 comments so far
a1Jim
home | projects | blog
87144 posts in 1746 days
#1 posted 485 days ago
Welcome to Ljs
A very involved and unique turning ,good job.
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
Borgmc1
home | projects | blog
152 posts in 485 days
#2 posted 485 days ago
Thank You Jim
Reaper621
home | projects | blog
124 posts in 499 days
#3 posted 484 days ago
Looks beautiful. Any tips on segmented turning in this fashion?
-- Laywer by day, Carpenter by later in the day.
Borgmc1
home | projects | blog
152 posts in 485 days
#4 posted 484 days ago
keep up with the center of the turning. if you look close you see that they are not symmetrical. if you are on facebook you can check out the pics that I posted of how I made this set.
http://www.facebook.com/media/set/?set=a.287144187999621.63589.186601851387189&type=3
wseand
home | projects | blog
1549 posts in 1211 days
#5 posted 444 days ago
They are quite incredible.
-- Bill - "Freedon flies in your heart like an Eagle" Audie Murphy
Borgmc1
home | projects | blog
152 posts in 485 days
#6 posted 444 days ago
WSEAND Thanks
Have your say...