| Project by Bsmith | posted 488 days ago | 1192 views | 12 times favorited | 3 comments |  |
 |
This is my version of a chisel plane. Thanks to Scott and many others for the inspiration. I used a scrap of walnut, drilled the alignment holes, cut the angle for the chisel then glued it all together. Still haven’t determined if it’s bevel up or bevel down. Seems to work both ways. Hope this inspirers you for a quick winter project.
-- Bryan
| Pin It |
3 comments so far
a1Jim
home | projects | blog
87269 posts in 1748 days
#1 posted 488 days ago
This is one cool chisel plane good job.
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
Stephen M. Skillins
home | projects | blog
30 posts in 488 days
#2 posted 488 days ago
Nice chisel plane I never thought of using an actual chisel for the blade. Brilliant. I make Krenov planes from time to time but I think I will copy your and scott’s idea. keep up the good work.
Steve Skillins
Owner of Skillins Furniture Co.
Danvers MA
-- Steve Skillins, Danvers MA
Dave
home | projects | blog
9195 posts in 1011 days
#3 posted 475 days ago
Very nice, very nice indeed. A fine use for a SW.
-- Superdav "No matter where you go - there you are." http://chiselandforge.com
Have your say...