through spiral bowl from a board!!!

  • Advertise with us
Project by michelletwo posted 01-19-2012 10:53 PM 5560 views 5 times favorited 31 comments Add to Favorites Watch
through spiral bowl from a board!!!
through spiral bowl from a board!!! No picture No picture No picture No picture No picture
Zoom Pictures

This is another attempt to make silk out of a sow’s ear! This is a bowl from a board, that I decided to cut out 3 spirals. Just like my last post,where I had never seen a top like I made it, I have never seen anyone make a bowl from a board, with spirals.
Was a dickens to sand & finish!! The top is sharp!
Hope you enjoy & thanks for looking

31 comments so far

View rayn's profile


175 posts in 3415 days

#1 posted 01-19-2012 11:26 PM


-- Ray,Iowa

View wizzardofwood's profile


229 posts in 3066 days

#2 posted 01-19-2012 11:42 PM

nice work …................

-- wizzardofwood..... "ITS MY JOB TO AMAZE YOU"

View MasterSergeant's profile


1372 posts in 2885 days

#3 posted 01-19-2012 11:54 PM

Just how cool is this?!

Most excellent work!!

-- Kelly, woodworker under construction

View Sheila Landry (scrollgirl)'s profile

Sheila Landry (scrollgirl)

9237 posts in 3117 days

#4 posted 01-20-2012 12:06 AM

That is really cool! :)


-- Designer/Artist/Teacher. Owner of Sheila Landry Designs ( Scroll saw, wood working and painting patterns and surfaces. "Knowledge is Power"

View SASmith               's profile


1850 posts in 3184 days

#5 posted 01-20-2012 12:58 AM

Very innovative.
Is the spiral cut buy hand or with a router jig or…?

Thanks for sharing.

-- Scott Smith, Southern Illinois

View buffalosean's profile


174 posts in 3584 days

#6 posted 01-20-2012 01:31 AM

that is freaken awesome! you should put a couple more pictures up of this one.

By the way, how large is it?

-- There are many ways to skin a cat...... but, the butter knife is not recommended

View hairy's profile


2782 posts in 3729 days

#7 posted 01-20-2012 01:37 AM

And the hits just keep a coming! Another beauty.

-- My reality check bounced...

View Sam's profile


67 posts in 2889 days

#8 posted 01-20-2012 02:38 AM

Way cool!

-- Sam S. - Hebron, KY

View LittlePaw's profile


1571 posts in 3275 days

#9 posted 01-20-2012 02:48 AM

I enjoyed your last bowl from a board, I made some a way back using the Ring Master. But as hard as I looked at this one, I couldn’t figure out how you did it. Was the bowl part made the same way as the other one? Then there’s the cutting of the spirals. That’s not only ingenious and out of the box _ in this case, it would be out of the bowl – thinking, it made the bowl stand out as not just another bowl! Great work, Michelletwo
By the way, how did you cut the spirals?

-- LittlePAW - The sweetest sound in my shop, next to Mozart, is what a hand plane makes slicing a ribbon.

View TurnTurnTurn's profile


614 posts in 3306 days

#10 posted 01-20-2012 03:49 AM

Great piece of work!!!!!

-- TurnTurnTurn

View CanuckGal's profile


75 posts in 3413 days

#11 posted 01-20-2012 05:01 AM

Absolutely STUNNING!

-- EGO postulo , EGO venalicium , EGO incidere. I measured, I marked, I cut. Latin instructions for firewood.

View mmh's profile


3677 posts in 3919 days

#12 posted 01-20-2012 05:33 AM

Beautifully executed! One would never guess it’s made from a board! You’re really pushing the envelope here.

-- "They who dream by day are cognizant of many things which escape those who dream only by night." ~ Edgar Allan Poe

View Schwieb's profile


1872 posts in 3658 days

#13 posted 01-20-2012 05:48 AM

amazing! I am trying to figure out how the heck you did that. Very creative. I tip my hat to you for some clever woodworking. I didn’t see your earlier post so I am trying to figure out if you turned this from a single piece of wood or actually glued up a board. You’ll have to show us dummies how you did that

-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.

View Transition's profile


340 posts in 2740 days

#14 posted 01-20-2012 07:34 AM

The top is sharp? The whole bowl is sharp!

-- Andrew, Orange County, CA -

View a1Jim's profile


117328 posts in 3774 days

#15 posted 01-20-2012 07:57 AM

very cool bowl nice work

-- wood crafting & woodworking classes

showing 1 through 15 of 31 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics