New Scroll Saw

  • Advertise with us
Project by Bruce posted 02-17-2007 09:00 PM 6678 views 3 times favorited 13 comments Add to Favorites Watch
New Scroll Saw
New Scroll Saw No picture No picture No picture No picture No picture
Zoom Pictures

Just purchased this Delta scroll saw through Craig’s list. I am thrilled to have it. It has variable speed and a air blower for the sawdust. Does anyone have any idea of model, year and where I can find any needed parts?
Bruce Ebling

-- Bruce Ebling

13 comments so far

View Bill's profile


2579 posts in 4131 days

#1 posted 02-17-2007 09:21 PM

Did you try the Delta site? Maybe they can help.

It looks like a nice saw and should give you lots of good use.

-- Bill, Turlock California,

View scottb's profile


3648 posts in 4297 days

#2 posted 02-17-2007 10:05 PM

Looks a bit like the Scroll Saw attachement I have for my (original model) Shopsmith. As the company doesn’t supply parts for the older machines, I’ve resorted, with some luck, to eBay. Some people are in the same boat, or are farming out their old machines for parts. (Lucky for us, but a shame, as these machines will likely outlive some of the newer ones)

-- I am always doing what I cannot do yet, in order to learn how to do it. - Van Gogh -- --

View oscorner's profile


4563 posts in 4280 days

#3 posted 02-18-2007 02:44 AM

Congradulations! Looks like a nice machine. I hope you are able to find the parts you need.

-- Jesus is Lord!

View Karson's profile


35111 posts in 4370 days

#4 posted 02-18-2007 04:28 AM


I noticed a new LumberJock sign up called PopPop. he is a machinest by trade and if you need repair parts he might be able to mfg them for you if they are not available on the used market.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware soon moving to Virginia †

View jockmike2's profile


10635 posts in 4216 days

#5 posted 02-18-2007 05:57 AM

Nice machine, before I got my newer Delta lathe I was using one I bought off a friend up north that had one in his garage that belonged to his great grandfather who had gotten it out of the factory he worked in down by Detroit. My friend figured the lathe to be well over a hundred years old. It ran good when I put a motor and bearings in it. In fact it still works good I’m going to hate to sell it, but I don’t have the room for it. jockmike

-- (You just have to please the man in the Mirror) Mike from Michigan -

View PopPop's profile


6 posts in 4088 days

#6 posted 02-18-2007 07:55 AM

Hi Bruce. As luck would have it, I have a Powermatic Model 95 Scroll Saw in my basement that is identical to your Delta. Mine needs a little work, but I haven’t got around to it yet. The technical manuals for these saws are almost non existant, however there are owner’s manuals about that have parts lists in them. I was able to buy some parts for mine through the WMH Tool Group. They are the parent company for Powermatic. If you go to there is a parts section that you might be able to get some parts through. I believe these scroll saws went out of production in the `70’s. About the only difference in yours and mine is yours is gray and mine is green. Keep in touch.

-- Chuck, Sparta, Tennessee,

View bud's profile


21 posts in 4123 days

#7 posted 02-18-2007 08:20 AM

friend just got some parts off ebay; also try dicks tools, in California , they have parts also, believe saw produced around late 40 or early 50.

View WayneC's profile


13753 posts in 4067 days

#8 posted 04-10-2007 02:04 AM

Did you try old woodworking machines OWWM?

I poked a bit try this one.

-- We must guard our enthusiasm as we would our life - James Krenov

View jeanmarc's profile


1899 posts in 3686 days

#9 posted 05-21-2008 01:25 AM

C is a machine as that qu it would be necessary for me. qu it is the mark thank you

-- jeanmarc manosque france

View woodspyder's profile


80 posts in 3599 days

#10 posted 02-09-2010 10:40 AM

It looks like a Delta 40-440 I have one just like it. Yours has the varible speed drive mine has multi position belt drive.

-- Measure three times, cut twice.

View a1Jim's profile


117063 posts in 3547 days

#11 posted 02-09-2010 07:29 PM

congrats on your new old saw.

-- wood crafting & woodworking classes

View geezerglide's profile


10 posts in 1818 days

#12 posted 07-25-2014 04:44 PM

It is a Delta / Rockwell 40-440, I have one that is the same except the variable speed function, You can find parts on various web sites, I found the best place is Ebay for parts that you can’t get on the Delta page because they don’t make the parts anymore, the parts can be kinda spendy even for used parts. Great looking saw.

” The other day I looked all over the shop for a hot glue gun, but all I found was an average glue gun with a great personality! “


View ralbuck's profile


4332 posts in 2236 days

#13 posted 06-11-2015 11:14 PM

Good Score and somebody wil know where to get parts when you need them. has a lot of parts for a lot of machines.

-- Wood rescue is good for the environment and me! just rjR

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics