|Project by Eddie||posted 01-18-2012 12:10 AM||1631 views||0 times favorited||2 comments|
that was my old a 2’ x 4’ router table had clamped to a old work bench. got a new shop don’t have room for this old bench in it. it wasn’t real level anyway ill make a set of cabinet with it. but the router table with a fence that pivots at one end and uses a clamps at the other worked well,it was a stow n go table by Roland Johnson contributing editor of Fine Woodworking .com a free video there that shows how it works and a set of plans but the new fence was by a guy called sarge a lumber jock up in Canada very sharp in this wood working craft. http ://atelierdubricoleur.wordpress.com/ i thought he was a Cajun from here in Louisiana that went to Canada but a friend of mine that works at a cabinet shop up the road told me, that’s from the southern part of the state where most of them live, said i must not had any history classes i had to admit, i skipped way to much in school, and that Cajuns came from Canada to Louisiana not Louisiana to Canada i finally told him i didn’t care he just had a good design on the fence and is very sharp in this craft so i put a top on her and and new fence.and working on the cabinet for it. works very good so far. i am going to have to fine tune the slider on the fence its hard to slide a little adjustment i think it will be good to go its not going to come in first at any race but it’ll finish it .
-- Jesus is ok with me