LumberJocks

C u t t i n g B o a r d T r i o

  • Advertise with us
Project by Lori posted 01-17-2012 01:54 AM 2123 views 6 times favorited 17 comments Add to Favorites Watch

I made this for my mother (she gets all my experimental projects) quite a few years ago. If you look close you’ll see the Limbert coffee table (my latest project) in one of the pictures. The close up was take of the back of the cutting board (bad side down). This design was taken from an Incra web site designed by from W o o d t u r n e r P R O, I’m not sure if its still up on their web site. If you can’t find it, just send me a personal message and I’ll send you a copy. The instructions are pretty straight forward but you’ll need to make a couple of jig’s, I can help you with that if need be. I only went to the second generation. I used Bloodwood, Bubinga & White Oak. This was one of my very first projects & I really did not have alot of tools at that time. I think I had a jointer and a tablesaw….this project involved ALOT of hand sanding!!!
http://www.woodturnerpro.com/projects/Build-It/Cutting%20Board%20Trio.pdf





17 comments so far

View degoose's profile

degoose

7074 posts in 2236 days


#1 posted 01-17-2012 02:02 AM

Outstanding… having made a few of these I know how hard it is to line every thing up…a fair job you have done…very tribal I think…

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View Roger's profile

Roger

16569 posts in 1686 days


#2 posted 01-17-2012 02:13 AM

that’s a lotta gluin :) this would brighten any kitchen. I like the rubber feet you put on for no-slippin

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View Schwieb's profile

Schwieb

1641 posts in 2343 days


#3 posted 01-17-2012 02:45 AM

wow Lori, this is very nice, especially if it is a “first” project. I’m betting your Mom is quite proud to have it. The Limbert table is very nice too.

-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.

View smitty22's profile

smitty22

638 posts in 1828 days


#4 posted 01-17-2012 03:31 AM

That’s Krazy! Love the framed effect, sets this off very nicely.

-- Smitty

View JL7's profile

JL7

7762 posts in 1847 days


#5 posted 01-17-2012 04:05 AM

Very cool…...nicely done Lori…

Jeff

-- Jeff - I have not failed. I've just found 10,002 ways that won't work.

View Philzoel's profile

Philzoel

286 posts in 1225 days


#6 posted 01-17-2012 04:10 AM

nice looking with grain? board. I use same kind of feet you use.. they are very stable. Just got Jet Drum sander.

-- Phil Zoeller louisville, KY

View a1Jim's profile

a1Jim

113222 posts in 2459 days


#7 posted 01-17-2012 04:19 AM

Very nice work Lori ,a way cool design and a wonderful build.

-- http://artisticwoodstudio.com Custom furniture

View Alexander Valle-Albert's profile

Alexander Valle-Albert

138 posts in 2299 days


#8 posted 01-17-2012 04:23 AM

Nice project… thanks for sharing…

View Ken90712's profile

Ken90712

15442 posts in 2070 days


#9 posted 01-17-2012 12:39 PM

Very cool! Great work.

-- Ken, "Everyday above ground is a good day!"

View michelletwo's profile

michelletwo

2380 posts in 1897 days


#10 posted 01-17-2012 01:54 PM

first project? totally awesome..the colors fantastic.. 2nd & 3rd generation laminations are no picnic…you did an amazing job . I seriously want to see your 4-5-10th projects, if this is the first.

View Bricofleur's profile

Bricofleur

1241 posts in 2075 days


#11 posted 01-17-2012 02:46 PM

Wow! I can’t believe this is your first project. Hat’s off! Were you a master craftperson in your prior life? Or maybe a zen buddhist monk? :-) Amazing job!

Best,

Serge

http://atelierdubricoleur.wordpress.com

-- Learn from yesterday, work today and enjoy success tomorrow. -- http://atelierdubricoleur.wordpress.com

View Maveric777's profile

Maveric777

2692 posts in 1958 days


#12 posted 01-17-2012 03:02 PM

Now that is pretty cool! Thanks for sharing!

-- Dan ~ Texarkana, Tx.

View BarbS's profile

BarbS

2434 posts in 2967 days


#13 posted 01-17-2012 06:13 PM

Very nice, Lori. I’m wondering what you mean “the bad side down?” Looks good to me. And… how about a photo of that Limbert table?
found it in your Projects. You have a beautiful shop, and year-round good weather to use it!

-- http://barbsid.blogspot.com/

View StumpyNubs's profile

StumpyNubs

6390 posts in 1682 days


#14 posted 01-17-2012 07:00 PM

Very unique! Thanks for posting!

-Jim; aka “Stumpy Nubs”
(The greatest woodworking show since the invention of wood is now online!)

-- It's the best woodworking show since the invention of wood... New episodes at: http://www.stumpynubs.com

View harrywho's profile

harrywho

116 posts in 2114 days


#15 posted 01-17-2012 10:59 PM

Okay young lady, not only did you make a beautiful 2nd generation board but for the life of me I can’t find a break in the grain, let alone a glue line, on your frame. Did you inlay it? Now you’re just showing off!!!!
Simply great Lori!

-- Harry, Indiana

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com