a new addition ..?

  • Advertise with us
Project by Rembo posted 919 days ago 3630 views 17 times favorited 20 comments Add to Favorites Watch

if it is not clear why? I’ll try to answer

20 comments so far

View Greg The Cajun Box Sculptor's profile

Greg The Cajun Box Sculptor

4927 posts in 1904 days

#1 posted 918 days ago

Nice jig design.

-- Every step of each project is considered my masterpiece because I want the finished product to reflect the quality of my work.

View Ken90712's profile


14821 posts in 1784 days

#2 posted 918 days ago

Well done, a nice addition to the Incra system.

-- Ken, "Everyday above ground is a good day!"

View JL7's profile


6977 posts in 1560 days

#3 posted 918 days ago

That is crystal clear! This is a really idea – using the Incra fixture is always hit or miss…....I’ll add this to the list….Thanks!


-- Jeff - I have not failed. I've just found 10,002 ways that won't work.

View abie's profile


587 posts in 2366 days

#4 posted 918 days ago

I own an Incra Jig and have used it often
I have a ton of questions about the design which looks fantastic..
why two ends?
how far off the table or the router blade is the sled?
what holds the sled fast to the side? my trouble has been just that..
thanks for your exlplanation.

-- Bruce. a mind is like a book it is only useful when open.

View Rembo's profile


408 posts in 1545 days

#5 posted 918 days ago

abie , one-way back from the edge of the thickness of the step, which allows me orentirovatsya only one line (red or blue) and a smaller number of clicks.
Besides, I can in one pass at once to fix the workpiece, at least 2 boxes.
also more convenient to make spikes on the longer and high detail.

View a1Jim's profile


111999 posts in 2172 days

#6 posted 918 days ago

congrats on a super fixture .

-- Custom furniture

View Rembo's profile


408 posts in 1545 days

#7 posted 918 days ago

a1Jim,Thank you! I think INCRA be able to save ink))

View MShort's profile


1722 posts in 2013 days

#8 posted 918 days ago

Fantastic jig. Great creative thinking.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View waho6o9's profile


4744 posts in 1172 days

#9 posted 918 days ago

Rembo for President! Most excellent jig.

View Rembo's profile


408 posts in 1545 days

#10 posted 918 days ago

waho6o9,Thank you! I will try to prepare for the next election campaign )

View Froggy's profile


77 posts in 1257 days

#11 posted 918 days ago

Роман, отлично! :) А зачем приспособа двусторонняя?

Very nice idea! My self-made fixture is somewhere in between yours and the original, but I like your jig much better!

Just one question—why seemingly the same setup on both sides?

View EarlS's profile


150 posts in 943 days

#12 posted 918 days ago

That has to be the most precise and complicated router fence I’ve ever seen. I guess I’m not using my router to it’s full potential since I can’t even figure out what the jig is used for…


-- Earl "I'm a pessamist - generally that increases the chance that things will turn out better than expected"

View Froggy's profile


77 posts in 1257 days

#13 posted 918 days ago

EarlS – take a look here:

It’s a positioner – quite a different animal compared to traditional fences. The fence itself can be more or less complicated, but it’s the positioning system that makes it very different.

View Rembo's profile


408 posts in 1545 days

#14 posted 918 days ago

Кирилл ,спасибо !
дело в том ,что детали по одной и другой стороне стоят со смещщением толщины шага . то есть ,удаленность от упора пакета заготовок по одной стороне на 6 мм (это ширина шипа ) это позволяет мне делать шип и проушину сразу ! по одной из линий (только нужно выбрать ,какой цвет линии вам нравится и смещать позиционер только по этим рискам одного цвета ) мне нужно только переворачивать шаблон .
плюс я могу зажать заготовки большей длины и высоты . крепление получается более жесткое !
я сколько не пытался пробовать ,как в видео ролике показано ,у меня не получалось .видимо нужны упорные годы тренировок ))) я больше не буду пользоваться фирменой кареткой INCRA ,повешу ее на гвоздь )
ну ,как смог -объяснил..
Cyril, thank you!
The fact is that the parts one by one and the other side stand with smeschscheniem thickness step. that is, the distance from the stop package of blank on one side of a 6 mm (the width of the spine), this allows me to pin and eyelet at once! on one line (only needs to choose which color lines you like and remove the positioner only those risks of the same color), I need only flip the template.
Plus I can hold stock of greater length and height. mount is a more rigid!
I did not try much to try, as in the video clip shown, I have not worked. apparently persistent need years of training))) I’m not going to use the original carriage INCRA, hang it on the nail)
Well, how could-explained ..

View Froggy's profile


77 posts in 1257 days

#15 posted 918 days ago

Thanks, Roman – I got it now! :) Sorry, didn’t quite understand it from your first explanation to Bruce (abie)...

showing 1 through 15 of 20 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase