|Project by Bob Kassmeyer||posted 01-07-2012 10:39 PM||1031 views||0 times favorited||3 comments|
My wife wanted a table for the end of our hall way for Christmas. This was the first project I’ve made that I took pictures of that I thought was good enough to post. The legs were bought from Home Depot and the bottoms tapered on the band saw then rounded with a hand plane. The aprons were a glue lamination with an applied molding on the bottom. I had some problems with the tenons on the short side of the apron getting it right at 90 degrees to the long side so one leg is a little off square. All in all I’m pretty happy with it and she loves it. Thanks for looking.
-- Bob Kassmeyer, Nebraska