LumberJocks

Can ya guess what this is? I found it on lumber jocks and decided to make one.

  • Advertise with us
Project by Bye Bye posted 01-01-2012 02:44 AM 2839 views 2 times favorited 29 comments Add to Favorites Watch

I found this as an answer to my fathers problem and decided to make one. Best Guess?

-- "Bazinga"





29 comments so far

View DIYaholic's profile

DIYaholic

15678 posts in 1493 days


#1 posted 01-01-2012 02:53 AM

A big Bungie Cord holder!!!

What do I win???

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View Woodbutchery's profile

Woodbutchery

281 posts in 2403 days


#2 posted 01-01-2012 02:56 AM

Belt or tie rack?

-- Making scrap with zen-like precision - Woodbutchery

View Jim K's profile

Jim K

94 posts in 1955 days


#3 posted 01-01-2012 03:10 AM

A banana Tree?

View JoeyG's profile

JoeyG

1269 posts in 1443 days


#4 posted 01-01-2012 03:14 AM

a lyre????

-- JoeyG ~~~ http://www.facebook.com/JHGWoodWorks

View oldoak's profile

oldoak

56 posts in 1797 days


#5 posted 01-01-2012 03:24 AM

A spaghetti drying rack?

View boxcarmarty's profile

boxcarmarty

10319 posts in 1178 days


#6 posted 01-01-2012 03:38 AM

A ladder so squirrels can reach the bird feeder…..

-- My mind is like lighting, one brilliant flash, then its gone.....

View ChuckV's profile

ChuckV

2523 posts in 2345 days


#7 posted 01-01-2012 04:17 AM

Dowel storage?

-- “While the world with closed eyes sleeps, The sky knows and weeps - steel rain. ” ― Nathan Bell

View David Grimes's profile

David Grimes

2072 posts in 1457 days


#8 posted 01-01-2012 04:20 AM

A rude awakening ?

-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia

View David Grimes's profile

David Grimes

2072 posts in 1457 days


#9 posted 01-01-2012 04:22 AM

I got it. Graduated chin up machine.

-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia

View a1Jim's profile

a1Jim

113061 posts in 2395 days


#10 posted 01-01-2012 04:31 AM

Cord or air hose holder? or a recliner for snakes:))

-- http://artisticwoodstudio.com Custom furniture

View Mikey1950's profile

Mikey1950

12 posts in 1175 days


#11 posted 01-01-2012 05:13 AM

a GLOVE drying rack

-- MichiganMike

View FirehouseWoodworking's profile

FirehouseWoodworking

643 posts in 2091 days


#12 posted 01-01-2012 05:13 AM

Half of a drying rack for pre-finishing trim?

-- Dave; Lansing, Kansas

View LittlePaw's profile

LittlePaw

1571 posts in 1896 days


#13 posted 01-01-2012 05:17 AM

Well, if it’s not a Viking warship bow sprit, it’ll be a giant thingamajig to get the spaghetti out of the pot! :O !

-- LittlePAW - The sweetest sound in my shop, next to Mozart, is what a hand plane makes slicing a ribbon.

View David Grimes's profile

David Grimes

2072 posts in 1457 days


#14 posted 01-01-2012 05:19 AM

It’s the one thing he can’t reach and bust into bits and pieces and pile just outside the shop ?

-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia

View David Grimes's profile

David Grimes

2072 posts in 1457 days


#15 posted 01-01-2012 05:27 AM

You thread the chitterling up one side (alternating rungs), then cross over and thread down the other side. Tie the end onto a piece of wood from the wood pile, then (holding it tightly) run into the yard as fast as you can. Am I right ?

-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia

showing 1 through 15 of 29 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase