Maple Jar

  • Advertise with us
Project by Woodbridge posted 12-24-2011 03:40 PM 1065 views 0 times favorited 2 comments Add to Favorites Watch

This little maple vessel is 2” high and about 3.75” in diameter at the widest spot. The blank was not the greatest and I had to fill some gaps with epoxy. This one has very ineresting figure on it. It is turmed to about 1/8” wall thickness. I was not confident enough tunring this form and small shape in one piece. One good catch would shatter it, so I spilt it in two and turned the simpler shapes then glued it back togther to finish the turning.

-- Peter, Woodbridge, Ontario

2 comments so far

View  woodshaver Tony C   's profile

woodshaver Tony C

5902 posts in 3317 days

#1 posted 12-24-2011 03:57 PM

Interesting maneuver! Glad it worked out for you ! Very nice !

-- St Augustine FL, Experience is the sum of our mistakes!

#2 posted 12-28-2011 12:14 PM

Very sveet turning !!!


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics